Author Topic: Jenn Air Range problem JGS9900BDS  (Read 2042 times)

Offline rmccline

  • VIP Member
  • Member Since: May 2012
  • Posts: 2
Jenn Air Range problem JGS9900BDS
« on: May 01, 2012, 02:51:08 PM »
Control panel displays error code EE-214 M-214
Oven functions are locked out

Does anyone have a service manual for this unit? Error codes are new to me.

Don't want to buy the touch panel if it is something else. Error codes come up with touch panel disconnected.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Jenn Air Range problem JGS9900BDS
« Reply #1 on: May 01, 2012, 03:05:13 PM »
Here you go...

https://drive.google.com/file/d/0BzIiBNwRIV4Na3Y5N3VySDhfNm8/edit?usp=sharing

I have not had time to look at it myself. Read the service manual and let us know what you find wrong or if you have any other questions.


Hope you find our site helpful.

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Jenn Air Range problem JGS9900BDS
« Reply #2 on: May 01, 2012, 03:14:08 PM »
These are not standard fault codes they are EEPROM codes.
Possible causes are bad wire harness preventing control board communication.
Take a Kid fishing.

Offline rmccline

  • VIP Member
  • Member Since: May 2012
  • Posts: 2
Re: Jenn Air Range problem JGS9900BDS
« Reply #3 on: May 09, 2012, 11:09:04 AM »
Manual shows pins 1 and 10 on the Control panel are shorted by the presence of the control panel. Control board uses this in start up. These traces were open.

Upon shorting the pins the control boards boots to no errors just power loss on front panel.

Control panel or cable was proven bad by using diagram.

New control panel fixed it!

Don't know why it needs to be bonded to the entire sheet metal bezel but that's another story.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Jenn Air Range problem JGS9900BDS
« Reply #4 on: May 09, 2012, 11:16:14 AM »
Glad to hear you found the problem.  O0
Thanks for the update.



Touchpad and Control Panel Part # W10206071

Hope you find our site helpful.

Offline ts3

  • VIP Member
  • Member Since: Dec 2013
  • Posts: 2
Re: Jenn Air Range problem JGS9900BDS
« Reply #5 on: December 06, 2013, 02:05:00 PM »
AJ, could you please post this service manual again?  That link no longer seems to work, and I can't find it in Google Drive.

Thanks,
Trevor

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Jenn Air Range problem JGS9900BDS
« Reply #6 on: December 07, 2013, 08:46:47 AM »
Here it is on our google drive.
https://drive.google.com/file/d/0BzIiBNwRIV4Na3Y5N3VySDhfNm8/edit?usp=sharing


I also updated the link in the original post. Thanks for letting me know about the link not working.

Hope it helps...
Hope you find our site helpful.

Offline ts3

  • VIP Member
  • Member Since: Dec 2013
  • Posts: 2
Re: Jenn Air Range problem JGS9900BDS
« Reply #7 on: December 07, 2013, 11:49:28 AM »
Sure did help!  Just wanted to verify, as above, that my problem was with the touchpad.  Much thanks.

 

Jenn Air Duel Fuel Range

Started by Diyeng

Replies: 3
Views: 4826
Last post August 22, 2007, 04:24:51 PM
by Pegi
Jenn-Air self cleaning oven problem

Started by ralphthedog

Replies: 6
Views: 11243
Last post December 13, 2007, 08:15:34 PM
by ralphthedog
Jenn-Air Range Right Rear Element not Heating

Started by TechnicianBrian

Replies: 0
Views: 2172
Last post October 21, 2008, 05:20:49 AM
by TechnicianBrian
Maytag (Jenn-Air) Electric Oven electrical problem

Started by gus

Replies: 5
Views: 4260
Last post November 04, 2008, 06:00:43 AM
by Repair-man
71003401 Maytag Jenn-Air Range Electronic Control - Clock

Started by AJ

Replies: 1
Views: 4848
Last post April 12, 2013, 11:30:19 AM
by itsastarr
74006613 Maytag Jenn Air Range Oven Relay Control Board

Started by AJ

Replies: 0
Views: 5755
Last post April 08, 2009, 05:24:13 AM
by AJ