Author Topic: M/T d/w mod MDB9600AWS  (Read 664 times)

Offline All Brand

  • Technician
  • Member Since: Sep 2010
  • Posts: 65
  • Country: us
M/T d/w mod MDB9600AWS
« on: April 30, 2012, 01:23:13 PM »
Have normal cycle  light but wont start.No other comands work .I have replaced door latch assy and touch panel (console) in march for other problems.Every thing seems to go thru door switch's  but you should still be able to chg programs? thoughts would be appreciated thxs Dave All Brand Appliance

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 951
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: M/T d/w mod MDB9600AWS
« Reply #1 on: April 30, 2012, 01:36:50 PM »
Make sure console panel ribbon is in control board tight, other than that maybe control board

Sent from my MB865 using Tapatalk 2

Offline scrapiron

  • Technician
  • Member Since: Nov 2011
  • Posts: 140
  • Country: us
  • Service Tech Since 1974
Re: M/T d/w mod MDB9600AWS
« Reply #2 on: May 01, 2012, 04:33:19 PM »
I've run into repeat failures of the console/keypad. If cleaning with an eraser & reinserting the pigtail for keypad doesn't help, try another console.

Offline schaffersapplian

  • Technician
  • Member Since: Oct 2008
  • Posts: 619
  • Country: us
  • Every action has a reaction
    • Facebook
Re: M/T d/w mod MDB9600AWS
« Reply #3 on: May 01, 2012, 06:50:08 PM »
As All Brand said,  Your Keypad/Console is at fault here.  You most likely will have to replace it for the machine to work.  Basically your Start button is worn out.  If you need to do a load of dishes, you may be able to start the machine using the delay feature.
Authorized Samsung, Electrolux, Whirlpool, GE, Fisher Paykal, and Maytag Servicer with over 10 years experience.

Offline All Brand

  • Technician
  • Member Since: Sep 2010
  • Posts: 65
  • Country: us
Re: M/T d/w mod MDB9600AWS
« Reply #4 on: May 02, 2012, 01:13:37 PM »
I just replace console in april along with door switch. It work after i chg the console, for it to go again that quick i would have to thing it would be cntrl board verse's the panel going again.Thoughts ?