Testing Whirlpool Duet Door Lock Latch Hook Switch Assembly

[AJ]

How to test a Whirlpool Duet Door Lock Latch Hook Switch Assembly Part # W10253483



To check the door switch at the CCU, perform the following steps.

1. Unplug washer or disconnect power.

2. Disconnect the door lock/unlock sole-noids connector DL3 from the CCU.

3. Set the ohmmeter to the R X 1 scale.

4. To test the door lock/unlock sole- noids, touch the ohmmeter test leads to the indicated pins on connector DL3.

The meter should indicate as follows:

Door Unlock Solenoid - Pins 2 & 3 = 60 Ω
Door Lock Solenoid - Pins 1 & 3 = 60 Ω

5. Disconnect the door switch connector DS2 from the CCU.

6. To test the door switch, touch the ohm- meter test leads to pins 3 and 1 at DS2.
 
The meter should indicate as follows:
Door Closed = 0 Ω
Door Open = infinite





Whirlpool Duet Washer Door Lock Latch Hook Switch Assembly Part # W10253483

[rickgburton]

sole-noids?? The only noids left??  LOL