Author Topic: Kenmore top load 110.28002010 will not finnish drain cycle  (Read 2003 times)

Offline redrock

  • VIP Member
  • Member Since: Jan 2012
  • Posts: 18
The washer times out in drain cycle. Spin light on & door lock off means long drain or long fill?
Fault code shows    F9 &  E1  which means drain problem. The machine seems to drain all of the water, but can not leave the drain cycle. Unplugging the power for 10 minutes allows any cycle to begin, but the first normal drain cycle will cause long drain time out. To do laundry in NORMAL cycle for example will have the wash water drain, but can not go to rinse. unplug power for 10 minutes and then go to RINSE/DRAIN. Unplug power for another 10 minutes and go to DRAIN/SPIN
and the wash is done. My wife wants a new washer or husband, which ever can do laundry.

Model 110.28002010

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 953
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: Kenmore top load 110.28002010 will not finnish drain cycle
« Reply #1 on: April 21, 2012, 07:22:59 AM »
Problem sounds like drain pump needs a good cleaning.

Sent from my MB865 using Tapatalk 2

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Kenmore top load 110.28002010 will not finnish drain cycle
« Reply #2 on: April 21, 2012, 02:38:34 PM »
Yes,clean the drain pump filter.
Take a Kid fishing.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Kenmore top load 110.28002010 will not finnish drain cycle
« Reply #3 on: April 22, 2012, 02:08:34 PM »
Any updates for us?
Did you get a chance to clean out the drain pump?
Hope you find our site helpful.

Offline redrock

  • VIP Member
  • Member Since: Jan 2012
  • Posts: 18
Re: Kenmore top load 110.28002010 will not finnish drain cycle
« Reply #4 on: April 22, 2012, 07:20:13 PM »
Thanks for the advice. Drain pipe, pump to drain pipe and pump impeller were all ok. While the washer was on its face I spun the basket to see if any filth was in the little bit of water and heard things rolling under the basket. Bet they get clogged up. HElP. I removed the 7/16 screw, but cannot lift the wash plate to remove the rolling items. None of the videos seem to be my washer.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Kenmore top load 110.28002010 will not finnish drain cycle
« Reply #5 on: April 26, 2012, 04:58:00 PM »
Are you still working on this or did you get it fixed?


Maybe the service manual will help.


http://appliancejunk.com/forums/index.php?action=downloads;sa=view;down=323
Hope you find our site helpful.

Offline itisfixed

  • VIP Member
  • Member Since: Oct 2013
  • Posts: 5
Re: Kenmore top load 110.28002010 will not finnish drain cycle
« Reply #6 on: October 02, 2013, 08:04:04 PM »
Has anyone come up with some new thoughts on this issue, I am experiencing the same problems with my 110 28002011. All the components that make it fill, drain, spin, and wash are working but it doesn’t finish a cycle. Sometimes it will stop and release the door lock, sometimes it will pause for more than 30 min then start again. It seems that it is confused but after unplugging it seems to be ok through half the cycle.

Offline redrock

  • VIP Member
  • Member Since: Jan 2012
  • Posts: 18
Re: Kenmore top load 110.28002010 will not finnish drain cycle
« Reply #7 on: October 10, 2013, 09:19:45 AM »
Hi, The machine healed itself and has been perfect for quite a while. After purchasing the reccomended hub assemly parts for reassembly and finally making a tap puller for the wash plate , it healed itself. Was it slight clogging in the drain sensor? was it sloppy timer position? Was it the board? Now happy not too know. Sorry for the late thanks for the good assistance.

Offline itisfixed

  • VIP Member
  • Member Since: Oct 2013
  • Posts: 5
Re: Kenmore top load 110.28002010 will not finnish drain cycle
« Reply #8 on: October 10, 2013, 11:48:37 AM »
Thanks for the reply, mine hasn't healed itself yet, so the plan is to pull and reconnect the wires to the shifter/actuator do a test run. If that doesn't work then I will buy a shifter/actuator.

 

Kenmore Elite top load grinding in drain cycle (after replacing tranny)

Started by cmwerner

Replies: 1
Views: 293
Last post February 15, 2014, 04:11:33 PM
by cmwerner
Kenmore 90+ will not drain water after wash cycle

Started by sheriberri

Replies: 3
Views: 1885
Last post May 01, 2010, 10:36:26 AM
by sheriberri
Kenmore Top load washer won't spin, drain

Started by Rotorranch

Replies: 5
Views: 5451
Last post June 20, 2010, 02:46:20 PM
by JWWebster
Kenmore top load washer agitates during spin cycle after repairs

Started by therdbandit

Replies: 9
Views: 1354
Last post May 27, 2013, 01:15:45 PM
by fairbank56
Frigidaire Washer - Noisy During Drain Cycle.

Started by AJ

Replies: 0
Views: 3672
Last post December 27, 2007, 07:54:12 PM
by AJ
Kenmore frontloader 417.42142100 shaking when in spin cycle

Started by candoan

Replies: 3
Views: 4193
Last post January 28, 2008, 06:04:40 AM
by candoan