Author Topic: Testing washer timer (Read 445 times)

QC_Todd · « **on:** April 19, 2012, 06:26:03 PM »

Can somone tell me what the BCT and what's underneath them on this label means and how it relates to testing the timer?

jumptrout51 · « **Reply #1 on:** April 19, 2012, 06:49:07 PM »

This is a bottom,center,top,designation for the timer terminals. They are used to determine power on,power off in specific cycles.

QC_Todd · « **Reply #2 on:** April 19, 2012, 07:01:40 PM »

Ok I understand that but what are the letters and numbers underneath each one? How do they factor in testing the timer?

Drakensig · « **Reply #3 on:** April 19, 2012, 10:07:40 PM »

Check fior any burned connectors.

Drakensig · « **Reply #4 on:** April 19, 2012, 10:09:57 PM »

I mean contacts. Normaly the timer is faulty if it is not washing or spinning.

jumptrout51 · « **Reply #5 on:** April 20, 2012, 04:47:58 AM »

Check fior any burned connectors.

They are wire color designations ie: BU=blue T=Tan W-Bk+White with Black strip

ApplianceJunk.com