Author Topic: Spin cycle starts out noisy.  (Read 959 times)

Offline v5000

  • VIP Member
  • Member Since: Apr 2012
  • Posts: 1
Spin cycle starts out noisy.
« on: April 18, 2012, 07:52:35 AM »
This is a direct drive machine model # lsr8244dz0
When the spin cycle starts a metallic noise is made. As the drum picks up speed the noise goes away. It stops and pumps ok. I removed the cabinet and bypassed the lid switch and listened for the noise. It is either coming from the clutch area or transmission area, but is hard to tell. The clutch felt warm after several times. Any other ideas and how can i tell if clutch is bad if I remove it? Should I just replace the clutch and try it?



Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8796
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Spin cycle starts out noisy.
« Reply #1 on: April 18, 2012, 09:40:53 AM »
Drop the motor/ tranny out of the unit and run it unattached to the drum to see if you can hear a noise.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 10342
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Spin cycle starts out noisy.
« Reply #2 on: April 18, 2012, 09:57:27 AM »
Quote
Should I just replace the clutch and try it?

Yes, here is the clutch for you model washer.



Clutch Assembly Part # 285785 Order now for same day shipping. 365 day return policy. RepairClinic.com


Using bitcoin is more fun with friends! Earn $10 of free bitcoin!
https://www.coinbase.com/join/appliancejunk

If you want to learn more about bitcoin I highly recommend reading
Bitcoin For Dummies; 1st edition (March 21, 2016)

 

GE Front Load Washer Noisy During Spin Cycle

Started by TechnicianBrian

Replies: 0
Views: 11190
Last post August 25, 2008, 07:01:33 AM
by TechnicianBrian
Amana Washer very noisy during spin cycle

Started by DIY Dori

Replies: 6
Views: 10913
Last post February 20, 2009, 04:46:05 PM
by MDScott714
Whirlpool washer - will not fill after spin cycle, starts agitating without wate

Started by tomaszkr

Replies: 7
Views: 6175
Last post January 18, 2009, 06:01:17 PM
by JWWebster
Spin cycle noisy and some water left in drum

Started by roblenski

Replies: 13
Views: 5033
Last post September 26, 2009, 10:23:42 AM
by roblenski
Samsung topload noisy when spin starts

Started by Joeyt56

Replies: 0
Views: 183
Last post January 05, 2016, 09:17:14 PM
by Joeyt56
Maytag washer mah4000aww spin cycle

Started by evo100

Replies: 1
Views: 5457
Last post December 25, 2007, 09:41:02 PM
by AJ