Author Topic: Sears Kenmore Model 110 Stops at Rinse Cycle  (Read 1179 times)

Offline MUD

  • VIP Member
  • Member Since: Apr 2012
  • Posts: 1
Sears Kenmore Model 110 Stops at Rinse Cycle
« on: April 18, 2012, 09:41:45 AM »
Our Sears Kenmore M# 110.26432501 washer stops just before the rinse cycle. I can hear a humming noise coming from behind the washer.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Sears Kenmore Model 110 Stops at Rinse Cycle
« Reply #1 on: April 18, 2012, 09:46:57 AM »
Their is a big plug that shoves into the timer. Make sure it is all the way in tight. Sometimes that plug vibrates out. Seen it.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9480
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Sears Kenmore Model 110 Stops at Rinse Cycle
« Reply #2 on: April 18, 2012, 09:54:03 AM »
Your washing machine uses cold water for the rinse cycle.

If the washer is not filling with water for the rinse cycle it's probably the water inlet valve you hear humming.

I would remove the hot and cold water fill hoses from the back of the washer and check the screens inside the water inlet valve as they maybe plugged.

If the screens are clean then I would install a new water valve. Here is the water valve for your mode if you need to order one.



Water Inlet Valve Part # 285805 Order now for same day shipping. 365 day return policy. RepairClinic.com


Hope you find our site helpful.

 

Sears Kenmore HD80 Series Washer Skipping Rinse Cycle

Started by rljulian

Replies: 2
Views: 4082
Last post January 14, 2009, 08:07:55 AM
by Mr. Fix-It
Kenmore Model 70 stoped working during the wash cycle

Started by kooken

Replies: 7
Views: 2883
Last post July 12, 2009, 09:11:20 PM
by whirlpooltech
Kenmore 300 fills on cycle start spins and drains but no rinse or short cycles

Started by kenmore300

Replies: 9
Views: 3110
Last post September 29, 2009, 07:18:00 AM
by Repair-man
Kenmore Elite Washer Stops at Same Point In Cycle

Started by resapp

Replies: 1
Views: 1601
Last post January 11, 2012, 10:18:01 AM
by JWWebster
Kenmore washer stops at spin cycle 110.44836300

Started by browniiiz

Replies: 5
Views: 1696
Last post May 03, 2012, 08:13:35 PM
by jumptrout51
Front Loading Washer Model#WCVH6800J1MR Stops before going into spin cycle

Started by sertich11

Replies: 4
Views: 2088
Last post July 02, 2012, 04:07:23 PM
by rego