Author Topic: Maytag dryer DG8000 motor replacement  (Read 1156 times)

Offline BarryDIY

  • VIP Member
  • Member Since: Apr 2012
  • Posts: 2
Maytag dryer DG8000 motor replacement
« on: April 10, 2012, 09:53:11 PM »
I have a similar problem as User strobelite1 encountered.

I have an older Maytag Dryer, DG8000.  It originally used the Y303358 motor.  I recently bought a replacement motor.  It is also a W10410999.   I downloaded and reviewed strobelite1s Maytag_Elec_Diag.  It is different from mine, as mine is an older model.  I have attached my wiring diagram.

My old motor had the following wires connected: White (jumpered with light Blue wire to another point on the switch), Red, Black, and Yellow.

I have no Gray source wire.  I noticed strobelite1s gray wire came to the motor from the Thermal Fuse.  My diagram shows the Yellow wire from the motor connected to the Thermal Fuse. 

I have no Push-to-Start wire (Yellow on strobelite1)

As a comparison is this how my switch should be wired up?

Yellow connect to 1/4 Thermal Protector tab.
Red Change to 1/8 and connect to #5
White connect to #1
Black connect to #2

Do I need a jumpered connection to #6?

Thank you in advance,
Barry

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Maytag dryer DG8000 motor replacement
« Reply #1 on: April 11, 2012, 12:37:49 AM »
DG8000
W + BU                      MOTOR THERMAL     
W + BU                                 1
RED                                       5
BK                                         2
YELLOW (Dryer Thermal Fuse)   6
« Last Edit: April 11, 2012, 12:45:59 AM by RegUS_PatOff »
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline BarryDIY

  • VIP Member
  • Member Since: Apr 2012
  • Posts: 2
Re: Maytag dryer DG8000 motor replacement
« Reply #2 on: April 11, 2012, 05:06:50 PM »
I connected the wires as listed.  Everything is working fine!  Thank you very much.

 

Maytag dryer LDG8606AAE motor replacement

Started by strobelite1

Replies: 10
Views: 4290
Last post February 10, 2014, 08:51:08 PM
by fairbank56
help wiring replacement motor for maytag dryer

Started by jello1

Replies: 1
Views: 1085
Last post September 01, 2012, 08:45:43 PM
by tgoods
Old Maytag Dryer LDE409 Motor replacement wiring

Started by Blanton

Replies: 2
Views: 411
Last post November 17, 2013, 07:20:35 AM
by go400
Need help on belt replacement for Maytag dryer

Started by phlip2red

Replies: 6
Views: 10198
Last post May 31, 2008, 11:40:09 AM
by AJ
Maytag Performa Dryer Belt replacement

Started by feehar

Replies: 1
Views: 20817
Last post July 07, 2008, 11:10:47 PM
by Repair-man
Maytag Dryer step by step belt replacement instructions

Started by rmasten

Replies: 2
Views: 62351
Last post July 10, 2008, 07:07:55 AM
by Repair-man