GE Front Load Washer wcvh6260fgg

[bobk]

Hi folks, I have this GE front load washer ( wcvh6260fgg ) that I purchase in 06' which has been working fine until now.

It seems that the machine washes and drains ok but does not want to rinse, It enters the rinse mode but nothing happens. It just sits there with the timer counting down. Also, the fabric softener dispenser is still full.

No error codes showing.

Any help would be much appreciated.

Thanks.

Bob

[JWWebster]

Ryan has posted a few tips in his blog:

http://www.appliance-repair-it.com/frontloadwasher.html

[bobk]

Hi Ryan.

Thanks for the link / tips.. I will have to investigate the pause between cycles link for my no "rinse" problem I guess. I wish it was or hope it is as simple as finding an error code which might translate to a simple adjustment or part replacement. Sheesh, maybe I better call a repairman. Short on cash like everyone else, I'd rather buy you a 6 pack of your choice..

Thanks.

Bob

[Ol' Lonely]

Remove the hot and cold water inlet hoses and take a look in the water inlet valve to see if the screens are plugged up.

Maybe it's not able to get any cold water for the rinse cycle.

[bobk]

Thanks for the tip O'l Lonely.

I just checked the inlets to the washer and all is clean as can be. At least you have me on the right track though. ( I think? ) The wash cycle will not work now if I select water temperature to " Cold Tap " So, I am thinking that there is an electronically controlled valve behind the sheet metal  that needs to be looked at or replaced or? Something in the control panel itself? Anyway, since I have the machines double stacked in a tight place, I have to figure out how I am going to get help to do this since my wife is not strong enough for this job. ( maybe )... Thanks for your input!! If you have any other ideas please feel free to post them.

Thank you.

Bob