Author Topic: GE Front Load Washer wcvh6260fgg  (Read 1078 times)

Offline bobk

  • VIP Member
  • Member Since: Mar 2012
  • Posts: 3
GE Front Load Washer wcvh6260fgg
« on: March 27, 2012, 10:06:52 PM »
Hi folks, I have this GE front load washer ( wcvh6260fgg ) that I purchase in 06' which has been working fine until now.

It seems that the machine washes and drains ok but does not want to rinse, It enters the rinse mode but nothing happens. It just sits there with the timer counting down. Also, the fabric softener dispenser is still full.

No error codes showing.

Any help would be much appreciated.

Thanks.

Bob

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE Front Load Washer wcvh6260fgg
« Reply #1 on: March 28, 2012, 08:49:11 AM »
Ryan has posted a few tips in his blog:

http://www.appliance-repair-it.com/frontloadwasher.html

May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline bobk

  • VIP Member
  • Member Since: Mar 2012
  • Posts: 3
Re: GE Front Load Washer wcvh6260fgg
« Reply #2 on: March 28, 2012, 05:51:26 PM »
Hi Ryan.

Thanks for the link / tips.. I will have to investigate the pause between cycles link for my no "rinse" problem I guess. I wish it was or hope it is as simple as finding an error code which might translate to a simple adjustment or part replacement. Sheesh, maybe I better call a repairman. Short on cash like everyone else, I'd rather buy you a 6 pack of your choice..

Thanks.

Bob

Offline Ol' Lonely

  • Technician
  • Member Since: Sep 2011
  • Posts: 54
  • Country: us
  • The Lonely Repairman
Re: GE Front Load Washer wcvh6260fgg
« Reply #3 on: March 28, 2012, 05:58:42 PM »
Remove the hot and cold water inlet hoses and take a look in the water inlet valve to see if the screens are plugged up.

Maybe it's not able to get any cold water for the rinse cycle.
"Depend on us."

Offline bobk

  • VIP Member
  • Member Since: Mar 2012
  • Posts: 3
Re: GE Front Load Washer wcvh6260fgg
« Reply #4 on: March 29, 2012, 06:40:21 PM »
Thanks for the tip O'l Lonely.

I just checked the inlets to the washer and all is clean as can be. At least you have me on the right track though. ( I think? ) The wash cycle will not work now if I select water temperature to " Cold Tap " So, I am thinking that there is an electronically controlled valve behind the sheet metal  that needs to be looked at or replaced or? Something in the control panel itself? Anyway, since I have the machines double stacked in a tight place, I have to figure out how I am going to get help to do this since my wife is not strong enough for this job. ( maybe )... Thanks for your input!! If you have any other ideas please feel free to post them.

Thank you.

Bob


 

Frigidaire Front Load washer making noise.

Started by curtis

Replies: 3
Views: 5429
Last post July 05, 2007, 09:25:04 PM
by AJ
frigidaire front load washer

Started by Mikki

Replies: 6
Views: 4445
Last post October 17, 2007, 04:42:52 PM
by Mikki
Video: Whirlpool Duet Front Load Washer Water Pump Clean Out.

Started by AJ

Replies: 0
Views: 4675
Last post November 28, 2007, 09:58:47 PM
by AJ
Replacing Front Load Washer Pump Model#LHW0050PQ

Started by resapp

Replies: 4
Views: 1604
Last post May 22, 2012, 12:34:13 PM
by AJ
Frigidiare Kenmore Front Load Washer Inner Tub & Tub Bearing Replacement.

Started by AJ

Replies: 5
Views: 5923
Last post March 03, 2008, 03:56:05 AM
by BrntToast
16007803 Maytag Front Load Washer Service Repair Manual

Started by AJ

Replies: 0
Views: 3026
Last post March 27, 2008, 08:23:12 PM
by AJ