Maytag Stackable Unit

[app1]

Hello
I am working on a Maytag stackable washer and dryer unit Model # LSE7804ACE and the washer timer would not advance so I purchased another timer Part# 22001180 and it looks a little different. The original one had three wire not hooked up to the original washer timer so I did tht with the new one and it does not advance, I then took off those three wires but it still does not advance. I start it and it fills then begins to agitate but will NOT advance. Do I have the wires wrong or should I be looking at something else as the problem? Thanks in advance for any detailed help
Bob

[bigbuck]

The orange hooks to #12 connection. The blue hook to #3. The Yellow (temp sw.) hooks to 2t. The purple (temp. sw.) to 2a. The gray &(level sw.)and gray neutral to 7n. The purple from conn. #16 goes to 16. The timer motor black wire goes to tm. The connector #10 yellow goes to #22. The red connector #13 goes to #32.The conn. #4 blue goes to # 21. The connector # 7 white goes to #3. Connector # 2 is green ground. This is all the information we have for the timer AP4026169 wiring. There are no pictures to provide. Hope this helps.

[theoldstoveguy]

Maytag wires are usually marked with the numbers on each wire and match to the timer.