Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: Maytag Performa PAVT454EWW No Spin  (Read 1512 times)

Offline brb87

  • VIP Member
  • Member Since: Mar 2012
  • Posts: 1
Maytag Performa PAVT454EWW No Spin
« on: March 25, 2012, 01:55:34 PM »
I have a Maytag Performa PAVT454EWW. It can agitate and drain, but cannot spin. While on the spin cycle, the brake is engaged. If I hold the agitator, I get a slow spin, no brake. I can slow the spin by hand, turn by hand, etc. as until I release the lid switch. I depress, I get the agitator, but no spin.

Can one direction of the motor be burnt out?

Offline AJ

  • Technician
  • Member Since: Jun 2007
  • Posts: 10241
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag Performa PAVT454EWW No Spin
« Reply #1 on: March 25, 2012, 09:35:31 PM »
I would think that if it agitates and drains the water out that the motor would be ok.

Sounds more like a problem with the pulley on the bottom of the washer.
It's a very common problem with this type of washer and I have replaced a lot of them.

Washer Transmission pulley & bearing repair kit. *Worn bearing causes slow or no spin, instructions included.

Drive Pulley 12002213 Order now for same day shipping. 365 day return policy. RepairClinic.com


Maytag Performa Won't Spin

Started by matthewdurango

Replies: 4
Views: 5810
Last post February 03, 2008, 02:36:16 PM
by JWWebster
Maytag Performa Agitates, no spin

Started by Joshuajared

Replies: 3
Views: 8924
Last post September 16, 2008, 10:15:34 PM
by Repair-man
Maytag Performa spin problem

Started by chrismorrow02

Replies: 3
Views: 8344
Last post December 15, 2008, 07:21:33 PM
by Repair-man
Maytag by Performa washer, Outta balance during spin cycles

Started by xman

Replies: 9
Views: 7153
Last post January 15, 2009, 09:15:04 AM
by xman
Maytag Performa won't agitate, but will spin

Started by helpless in LA

Replies: 0
Views: 3119
Last post May 19, 2009, 02:45:59 PM
by helpless in LA
Maytag Performa won't spin

Started by phips19

Replies: 2
Views: 2553
Last post October 18, 2009, 06:00:42 PM
by whirlpooltech