Author Topic: Whirlpool wiring sheet #9782240  (Read 882 times)

Offline kczar

  • VIP Member
  • Member Since: Mar 2012
  • Posts: 9
Whirlpool wiring sheet #9782240
« on: March 04, 2012, 02:00:58 PM »
I'm looking for a PDF of the Whirlpool wiring sheet part no. 9782240 (for a KitchenAid model YKERC508LS0 30-inch freestanding electric range) to complement the stained/crude paper copy I have.

Would also appreciate any kind of service manual that may exist for this model, too.

Thanks in advance!   8)

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Whirlpool wiring sheet #9782240
« Reply #1 on: March 04, 2012, 03:52:13 PM »
What's wrong with it?

Offline kczar

  • VIP Member
  • Member Since: Mar 2012
  • Posts: 9
Re: Whirlpool wiring sheet #9782240
« Reply #2 on: March 04, 2012, 04:44:30 PM »
What's wrong with it?

Possibly nothing, and I simply wanted to grab a PDF of the wiring sheet (that came shipped to me with the range when I purchased it) so it could reside, like all most other manuals I have, on my computer, for easy access.
Last night, it didn't appear to heat sufficiently to bake fish (using the same product and directions that had been used successfully numerous previous times) and this was after it made a startling pop sound a few days prior, so I suspected one of the elements had failed. I flipped the circuit breaker in my basement, then unplugged the oven, opened its back panel and tested the resistance of inner & outer broil elements, as well as the bake and convection elements, and all were in the 20 to 40 ohm range, so fine. I also tested the oven [temperature] sensor and it read around 1100 ohms at room temperature, so that's likely fine, too.
There's no error message on the range's display, and all other functions are operating normally.
I will have to keep using it until I can verify that indeed something is wrong; perhaps the noise was just something shifting in the storage tray at the bottom as my past experience with elements failing in former Hotpoint appliances, is that when they blow, you know it immediately.
I wasn't intending to start a long discussion about this; I only made the request for the literature since the servicematters.com website used to be open to the public where I could have helped myself, but obviously it hasn't been that way for many years, now.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Whirlpool wiring sheet #9782240
« Reply #3 on: March 04, 2012, 07:34:32 PM »
KC are you a Tech?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1482
  • Country: us
    • Buy me a beer through paypal
Re: Whirlpool wiring sheet #9782240
« Reply #4 on: March 04, 2012, 09:53:36 PM »
Wiring sheet attached.

 

KAC-43 Failure Codes and Wiring Diagrams for Whirlpool and KitchenAid Ranges Service Manual

Started by AJ

Replies: 0
Views: 943
Last post August 18, 2009, 12:47:13 PM
by AJ
8178360 Whirlpool Failure Codes and Wiring Diagrams for Freestanding Gas & Elec. Ranges Service Manual

Started by AJ

Replies: 0
Views: 1029
Last post August 18, 2009, 12:56:13 PM
by AJ
Whirlpool Electric stove RF362LXTSO diagnostic tech sheet

Started by Tsuf

Replies: 3
Views: 990
Last post April 13, 2013, 03:20:22 PM
by plochhead.
Removing main top on whirlpool gas range with sealed burners

Started by Vornato

Replies: 1
Views: 8338
Last post December 06, 2007, 07:17:47 AM
by apptech
Whirlpool Range - Top Burner Not Working

Started by AJ

Replies: 0
Views: 3834
Last post December 28, 2007, 12:21:08 AM
by AJ
Whirlpool Buit-In Oven - No heat

Started by AJ

Replies: 0
Views: 2520
Last post December 28, 2007, 07:41:25 AM
by AJ