Thanks all. latest developments are: metered and verified lid switch ok. water pressure switch ok.
i measured voltage across drain pump (when running and saw 120v. measured voltage across yellow and orange of motor during spin cycle and got no voltage. measuring from the brown of the drain pump to the orange of the motor showed 120v. I think the motor is bad.
I got adventurous and put the wires for the drain pump on the yellow and orange of the motor to see if it would spin (with the motor removed from the unit). No rotation but the breaker tripped!
I also disassembled the clutch and it looks fine (to an amateur !) Once again, I think that the motor is bad... Next step will depend on the price of the motor.
You guys are great. i appreciate all of your guidance.