Author Topic: How to remove the front panel on my Maytag Neptune Washer?  (Read 8300 times)

Offline WDW

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 1
Hello, I'm hoping someone can help me.  My washer is making a rattling sound while spinning.  It sounds like there is just something loose.  I need to remove the front panel but can't figure out how to do this.  I've done a little bit of research and the advice I've found doesn't work on this model.  Any help would be appreciated!

Model MAH8700AWW

Offline Repair-man

  • Technician
  • Member Since: Feb 2008
  • Posts: 3020
  • Country: us
  • The Virtual Repairman
    • The Virtual Repairmans Appliance Help
Re: How to remove the front panel on my Maytag Neptune Washer?
« Reply #1 on: April 15, 2008, 10:17:26 AM »
This is a Samsung made machine and I have a repair manual which covers the machine, even though it does not say Neptune on the manual. The rattling issue was common on these machines. Maytag says to secure the door wiring harness against the front panel if possible to eliminate rattling. The wiring cable and slap the sides of the cabinet if it is loose.

Click here for the manual
"It's only expensive if someone else fixes it for you" -
The Virtual Repairman   www.repair2000.com

 

help with maytag neptune front load washer start but stop after few seconds..

Started by soccerboy

Replies: 4
Views: 6046
Last post August 06, 2008, 06:40:10 AM
by Repair-man
How do you remove the front panel of the GE Profile Washer

Started by 88jrnascar

Replies: 1
Views: 4748
Last post March 01, 2009, 12:15:13 PM
by JWWebster
Maytag Front Load Neptune Washer Banging Noise when Spinning

Started by dkmminc

Replies: 11
Views: 12512
Last post June 17, 2010, 11:05:11 PM
by schaffersapplian
Maytag Neptune Front-load Washer Smoking (MAH8700AWW)

Started by jrossano

Replies: 7
Views: 4040
Last post October 16, 2012, 06:32:33 AM
by tgoods
Maytag MAH8700AWW Neptune Front Load Washer with dreaded ND

Started by dlachermeier

Replies: 2
Views: 4425
Last post November 08, 2012, 10:34:25 AM
by dlachermeier
Maytag Neptune front load washer continuously fills when not running

Started by clarkylm

Replies: 2
Views: 844
Last post September 06, 2013, 06:22:55 PM
by clarkylm