Author Topic: Kenmore 110.67732791 heating element stays on  (Read 3398 times)

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 953
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: Kenmore 110.67732791 heating element stays on
« Reply #10 on: February 15, 2012, 05:22:10 PM »
can you recheck that model number. thanks

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Kenmore 110.67732791 heating element stays on
« Reply #11 on: February 15, 2012, 06:22:03 PM »
Got a similar problem here except I just installed a new element and have looked, tested and inspected all wires / connections for shorts to no avail. Dryer runs fine but heating element will not turn off if door opened or timer is in any position other than off or air dry? Is it possible to be the timer control unit? I did have a mishap with a short out when I forgot to unplug the unit before disconecting the feed to the high limit thermo whcih I also replaced as well as 250 the thermo?

Also on another note the motor temp breaker keeps kicking out shutting down the cycle. I have cleaned all the rollers and everything else as well but I suspect this may be related to the heater element staying on and overheating the cabinet interior space?
You need to start a new topic with this problem.
Take a Kid fishing.

Offline AnnesLimo

  • VIP Member
  • Member Since: Feb 2012
  • Posts: 31
Re: Kenmore 110.67732791 heating element stays on
« Reply #12 on: February 15, 2012, 07:00:16 PM »
I could but it's the same problem that needs a different solution?

Offline Earl Dryer

  • Technician
  • Member Since: May 2008
  • Posts: 166
  • Country: us
Re: Kenmore 110.67732791 heating element stays on
« Reply #13 on: February 15, 2012, 07:04:00 PM »
Just because the element is new doesn't make it good. Take it off and check for a broken insulator, it has happened to me on couple occasions.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9607
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Kenmore 110.67732791 heating element stays on
« Reply #14 on: February 15, 2012, 07:06:04 PM »

I could but it's the same problem that needs a different solution?


Please do start a new topic and if you feel this topic is related to your problem post a link to it from your topic.


This topic belongs to someone else.


If we just had one topic for every dryer that did not heat or every refrigerator that did not cool things would get very confusing around here.


Thanks for understanding.
Hope you find our website helpful.

Offline AnnesLimo

  • VIP Member
  • Member Since: Feb 2012
  • Posts: 31
Re: Kenmore 110.67732791 heating element stays on
« Reply #15 on: February 15, 2012, 07:09:02 PM »
Just because the element is new doesn't make it good. Take it off and check for a broken insulator, it has happened to me on couple occasions.

I did that and found no problems with the element grounding out. I put a meter to everything and got no reading to the frame cage.

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9607
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Kenmore 110.67732791 heating element stays on
« Reply #16 on: February 15, 2012, 07:09:52 PM »
Please start a new topic, this one is being locked.
Hope you find our website helpful.

 

Kenmore 90 series heating element stays on.

Started by AnnesLimo

Replies: 63
Views: 9051
Last post February 18, 2012, 09:42:43 PM
by tgoods
Lady Kenmore portable 110V clothes dryer heating element does not turn off

Started by mizzn1t

Replies: 1
Views: 4232
Last post November 26, 2008, 07:43:07 PM
by JWWebster
Replacing the Heating Element on a Kenmore Serise 70 Electric Dryer

Started by jracmm

Replies: 1
Views: 2734
Last post December 02, 2008, 07:34:16 PM
by JWWebster
Kenmore Model 70 electric dryer heating element 279838

Started by kjb

Replies: 1
Views: 5532
Last post April 24, 2010, 12:47:40 PM
by JWWebster
Kenmore series 90 heating coil stays on when door is open

Started by RT1976

Replies: 20
Views: 6077
Last post September 09, 2011, 04:18:14 PM
by JWWebster
heating element

Started by brad

Replies: 5
Views: 4984
Last post February 15, 2008, 03:47:18 PM
by brad