Author Topic: GE SxS question  (Read 906 times)

Offline diverboy1980

  • Technician
  • Member Since: Nov 2011
  • Posts: 70
GE SxS question
« on: February 15, 2012, 10:57:33 PM »
Hey guys, I am finally getting back to calls since my hand was cut. Had a question about the GE SxS today that would not get any water out the door dispenser but it will dispense ice. I verified both sides of the water valve work by manually advancing the ice maker and it filled. I then swapped the wiring and when I manually advanced the ice maker water come out the door dispenser so I know the line isn't frozen. I verified I have 120vac at the plug when not on the water valve and I push the dispenser switch but when I hook it up to either side of the water valve I got 0 to 5vac when I pushed the dispenser switch. Almost like I get power as long as there is no load. This is an older non-motherboard GE model TFX26KRDAWW. Do you think there is some short in the wiring or what is your thoughts?


« Last Edit: February 15, 2012, 11:02:48 PM by diverboy1980 »

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: GE SxS question
« Reply #1 on: February 16, 2012, 05:59:20 AM »
Quote
I am finally getting back to calls since my hand was cut.
  O0

Sorry I don't have a answer for you, but it's good to see your back at it.

Seems like a odd problem. Will be interesting to hear what some of the other techs think.

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1521
  • Country: us
    • Buy me a beer through paypal
Re: GE SxS question
« Reply #2 on: February 16, 2012, 09:34:19 AM »
Time delay module, WR55X129.

 

Offline diverboy1980

  • Technician
  • Member Since: Nov 2011
  • Posts: 70
Re: GE SxS question
« Reply #3 on: February 16, 2012, 09:54:31 AM »
Thanks TGOODS, I just ruled that out because both ice settings worked on it. I will get a price on it and check with the customer.

 

Yes, another icemaker repair question

Started by sapp4l

Replies: 15
Views: 7135
Last post September 04, 2008, 07:39:55 AM
by whirlpooltech
Kenmore Elite SS question

Started by jrudyjr

Replies: 17
Views: 6914
Last post October 19, 2008, 09:10:30 AM
by Repair-man
LG LFX25960ST Flapper Question...

Started by mmcdonald6

Replies: 4
Views: 2820
Last post December 17, 2009, 12:37:01 PM
by MajorApp
I have a newb Question Here

Started by bfd_ast

Replies: 2
Views: 1433
Last post July 11, 2010, 01:09:54 PM
by JWWebster
Plumbing question for Icemaker line

Started by prime311

Replies: 8
Views: 2724
Last post September 03, 2011, 06:32:10 AM
by whirlpooltech
Damper question

Started by needhelp2

Replies: 5
Views: 1563
Last post October 12, 2011, 10:08:28 AM
by needhelp2