Author Topic: Kenmore Washer Error Code 21  (Read 736 times)

Offline app1

  • Technician
  • Member Since: Aug 2011
  • Posts: 159
Kenmore Washer Error Code 21
« on: February 16, 2012, 05:15:22 PM »
Working on a Kenmore Washer Model # 110.47512600 and it will NOT pump the water out and it has an error code 21. What is this code and how difficult to fix. Thanks for any help!
Bob

Online AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 8942
  • Country: us
    • Buy me a beer through paypal
    • ApplianceJunk.com - Appliance Repair Help
Re: Kenmore Washer Error Code 21
« Reply #1 on: February 16, 2012, 05:34:50 PM »
I have attached a copy of the tech sheet.


F/21  LONG DRAIN   


 
 Possible Causes/Procedure
 
  • Check the drain hose and make sure it is not plugged or kinked.
      Unplug washer or disconnect power.
      Check the electrical connections at the pump and make sure the pump is running.
      Check the drain pump filter for foreign objects.
      Plug in washer or reconnect power.
      If the above does not correct the problem, go to step 7.
      Unplug washer or disconnect power.
      Replace the pump.
     
 
Hope you find our site helpful.

 

kenmore F/L WASHER F06 ERROR CODE

Started by gregaguilar

Replies: 0
Views: 154
Last post January 26, 2014, 05:01:07 PM
by gregaguilar
Whirlpool Duet Washer - F-30 error code and clunking noise in detergent area.

Started by AJ

Replies: 3
Views: 11796
Last post November 15, 2009, 09:34:58 AM
by AJ
Kitchenaid Washer F11 Error Code

Started by TechnicianBrian

Replies: 0
Views: 4153
Last post March 23, 2008, 07:06:27 AM
by TechnicianBrian
Maytag Washer F01 Error Code

Started by TechnicianBrian

Replies: 0
Views: 6541
Last post June 17, 2008, 07:13:27 AM
by TechnicianBrian
LG Front Load Washer LE Error code

Started by TechnicianBrian

Replies: 43
Views: 94180
Last post March 12, 2012, 08:01:50 AM
by roodog
Whirlpool Duet Washer F5 Error Code

Started by TechnicianBrian

Replies: 2
Views: 7846
Last post October 05, 2008, 08:39:47 PM
by TechnicianBrian