Author Topic: Wp transmission  (Read 1095 times)

Offline Mettalikatt

  • Technician
  • Member Since: Dec 2011
  • Posts: 113
  • Country: us
Wp transmission
« on: January 24, 2012, 11:04:20 AM »
I replace a complete transmission last night when I left everything is working fine customer has called back stating that she heard a loud pop in now the machine does nothing. I'm going back out there now I will let everyone know what happened

Sent from my DROID RAZR using Tapatalk

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Wp transmission
« Reply #1 on: January 24, 2012, 11:48:37 AM »
That's odd, let us know what you find.

Offline Drakensig

  • Technician
  • Member Since: Dec 2011
  • Posts: 12
  • Country: za
  • I crave knowledge. I love what I do.
Re: Wp transmission
« Reply #2 on: January 24, 2012, 01:21:37 PM »
Probably the time or even capacitor on the motor. If the rubber dampers are not replaced between the motor and transmission the motor runs scew and causes to over load!
I'm the appliance super geek!

Offline Mettalikatt

  • Technician
  • Member Since: Dec 2011
  • Posts: 113
  • Country: us
Re: Wp transmission
« Reply #3 on: January 24, 2012, 01:30:52 PM »
Thanks for the input,  here now and all seems well,  she said the breaker was thrown last night.  Would that indicate a capacitor

Sent from my DROID RAZR using Tapatalk

Offline Drakensig

  • Technician
  • Member Since: Dec 2011
  • Posts: 12
  • Country: za
  • I crave knowledge. I love what I do.
Re: Wp transmission
« Reply #4 on: January 24, 2012, 02:02:31 PM »
Try measureing how much amps the machine is drawing with a full load on wash and spin. Also check timer for any bad or buned connections on the selector fingers. Hope I could be of service. Do reply with solution?
I'm the appliance super geek!

Offline Mettalikatt

  • Technician
  • Member Since: Dec 2011
  • Posts: 113
  • Country: us
Re: Wp transmission
« Reply #5 on: January 24, 2012, 03:40:10 PM »
Well,  everything sees to be working stil,  timer was free of burns

Sent from my DROID RAZR using Tapatalk

Offline Drakensig

  • Technician
  • Member Since: Dec 2011
  • Posts: 12
  • Country: za
  • I crave knowledge. I love what I do.
Re: Wp transmission
« Reply #6 on: January 24, 2012, 04:20:52 PM »
At least it is ok now.  O0
I'm the appliance super geek!

 

Transmission Issue

Started by engineerguy56

Replies: 3
Views: 3580
Last post November 18, 2007, 08:32:24 PM
by AJ
Video: Whirlpool Direct Drive Washer Clutch, Brake Transmission - Gear Case

Started by AJ

Replies: 6
Views: 12705
Last post January 26, 2008, 08:15:30 PM
by RegUS_PatOff
GE washer, transmission fluid

Started by LAB

Replies: 2
Views: 5152
Last post March 17, 2008, 02:16:34 PM
by JWWebster
transmission

Started by JPG

Replies: 7
Views: 3594
Last post April 07, 2008, 09:39:00 PM
by BrntToast
Lets Look Inside The Whirlpool Direct Drive Washer Gear Case/Transmission

Started by AJ

Replies: 0
Views: 6230
Last post April 21, 2008, 07:08:04 PM
by AJ
Sears washer transmission won't engage into posts

Started by bpmp

Replies: 3
Views: 1888
Last post July 04, 2008, 05:58:45 PM
by Repair-man