Author Topic: Timer will not move when drying  (Read 796 times)

Offline weriley

  • VIP Member
  • Member Since: Feb 2011
  • Posts: 4
Timer will not move when drying
« on: January 23, 2012, 11:45:02 PM »
I have a Maytag dryer model LDE312 series 02. 
I have replaced the timer and it will not advance.  I have tried in in multiple positions and on timed dry and air only settings.
What should I look at as being a possible culprit?



Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Timer will not move when drying
« Reply #1 on: January 24, 2012, 10:25:36 AM »
Do you have power to the timer motor?
Was the timer you installed a new one?

Is there a wiring diagram on the unit that you could post for us to look at?

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1249
  • Country: us
    • Buy me a beer through paypal
Re: Timer will not move when drying
« Reply #2 on: January 24, 2012, 06:08:28 PM »
312 is a simple system all auto dry goes through the cycling thermostat. The rest is direct to the timer to advance. I would trace wires and double check wiring to timer. Doing this from memory. 25 years Maytag Red Carpet.

Offline weriley

  • VIP Member
  • Member Since: Feb 2011
  • Posts: 4
Re: Timer will not move when drying
« Reply #3 on: January 25, 2012, 07:43:52 PM »
Anyone know where I can get a service manual?

Offline theoldstoveguy

  • Technician
  • Member Since: Jan 2008
  • Posts: 1249
  • Country: us
    • Buy me a beer through paypal
Re: Timer will not move when drying
« Reply #4 on: January 25, 2012, 09:20:25 PM »
In time dry the timer motor get 110 volts constant. First check for that. I have tossed all my paper books manuals etc.as they were on line. Whirlpool must think there aren't any out there so why bother with the old stuff. It is not listed on line any more. On the timer each terminal has a number on it make sure the wires (also numbered ) are matched up.

 

Maytag timer motor turns dial doesn't move

Started by Lonewolf

Replies: 6
Views: 2361
Last post August 10, 2011, 03:53:45 PM
by AJ
Dryers, not just for drying cloths anymore...

Started by AJ

Replies: 0
Views: 1352
Last post November 03, 2007, 09:58:32 AM
by AJ
Long drying times - dryer

Started by AJ

Replies: 0
Views: 1326
Last post January 21, 2008, 05:48:42 PM
by AJ
Whirlpool Dryer Stopped Drying (LER8858EQ2)

Started by Agrajag

Replies: 36
Views: 12793
Last post December 12, 2009, 05:42:53 PM
by Agrajag
Frigidaire Dryer Timer Knob p/n 1340354 black

Started by nivard

Replies: 6
Views: 7506
Last post March 31, 2008, 01:34:26 PM
by RegUS_PatOff
Whirpool dryer timer Part#: 691376 (needed)

Started by jet713

Replies: 4
Views: 2010
Last post April 08, 2008, 08:00:36 AM
by jet713