Author Topic: Hotpoint dishwasher model # HDA2000G00WW  (Read 2541 times)

Offline aceunderfire

  • VIP Member
  • Member Since: Jan 2012
  • Posts: 18
Hotpoint dishwasher model # HDA2000G00WW
« on: January 23, 2012, 02:39:30 PM »
I have a batch of these dishwashers that are all doing the same thing. They get water but not enough. The other maintenance man keeps telling me that the valves are bad. But I don't buy it. :tickedoff: . Besides he doesn't like to fix anything he labels everything BBR (broken beyond repair) and request new. I have taken some valves off and tested them with a digital ohms meter. I get a reading of 1.09. I also tested a brand new dishwashers valve and got a reading of 1.07-1.08. I have tried looking finding the resistance range on the internet but cannot. Like I said they are getting water but not enough. Its almost like the valve is have open. I have also check under neath the sinks and the shut off is open as well cleaned out the screens. the last one that I cleaned out the screen in worked good for about 3 days then started doing it again but only on the water saver mode...

Model HDA2000G00WW



Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Hotpoint dishwasher model # HDA2000G00WW
« Reply #1 on: January 23, 2012, 05:51:25 PM »
Those valves are special. They are built for flow rate. Any generic water valve or a valve for a ice maker will not work. So if them valves have age on them they could have flow rate issues even if they still ohm out and still let water in. They could be clogged. Seen it.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Hotpoint dishwasher model # HDA2000G00WW
« Reply #2 on: January 23, 2012, 07:50:13 PM »
Quote
I get a reading of 1.09. I also tested a brand new dishwashers valve and got a reading of 1.07-1.08. I have tried looking finding the resistance range on the internet but cannot.

You will either have a reading or have nothing if the coil is burnt out.

Quote
I also tested a brand new dishwashers valve

Being you already have a new valve in your hand I would install it and see if that fixes your problem. I think it will.

GE Water Inlet Valve, part number: AP2039343



Offline aceunderfire

  • VIP Member
  • Member Since: Jan 2012
  • Posts: 18
Re: Hotpoint dishwasher model # HDA2000G00WW
« Reply #3 on: January 23, 2012, 08:21:59 PM »
I would but it was still on a new dishwasher that ill be installing into a remodel tomorrow..I have 6 valves I pulled off of units that where going to be piched for remodel. Ill make sure there not clogged and try them individually to see if any of them are good to fix the broken unit... this just suck because the company wants us to figure it out because their to cheap to bring in someone but they wont give me the funds to get the new part unless I prove to them the part is bad.. lol. Thanks for your guidance.. you guys make my job less stressful.....

Sent from my DROID3 using Tapatalk

Offline MajorApp

  • Technician
  • Member Since: Feb 2008
  • Posts: 550
  • Country: us
Re: Hotpoint dishwasher model # HDA2000G00WW
« Reply #4 on: January 23, 2012, 09:29:18 PM »
How's the plumbing and the water quality? Has the plumbing been disturbed by construction?

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Hotpoint dishwasher model # HDA2000G00WW
« Reply #5 on: January 24, 2012, 05:45:23 AM »
Check the float switch on these units. The float switch stops the water fill.
Take a Kid fishing.

 

Whirlpool Dishwasher Model GU940SCGB3 Door Leak

Started by JimKaran

Replies: 10
Views: 12924
Last post September 13, 2007, 11:39:39 AM
by AJ
Hotpoint Dishwasher Leaking

Started by TechnicianBrian

Replies: 0
Views: 2470
Last post June 17, 2008, 07:13:27 AM
by TechnicianBrian
Hotpoint Dishwasher won't drain

Started by TUmom

Replies: 4
Views: 6094
Last post October 28, 2008, 11:14:21 PM
by JWWebster
Hotpoint Dishwasher won't drain

Started by bigmustang64

Replies: 2
Views: 1537
Last post April 25, 2009, 01:02:22 PM
by Al Capone
Hotpoint dishwasher won't drain

Started by bigmustang64

Replies: 1
Views: 1469
Last post April 25, 2009, 09:25:34 PM
by JWWebster
Service Manual Hotpoint Dishwasher HDA3400G02WW

Started by jmont

Replies: 0
Views: 3586
Last post November 16, 2009, 12:05:54 PM
by jmont