Author Topic: washer  (Read 903 times)

Offline i0leg

  • VIP Member
  • Member Since: Sep 2011
  • Posts: 16
washer
« on: January 20, 2012, 07:09:15 AM »
hi. washer whirpool cabrio error UL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: washer
« Reply #1 on: January 20, 2012, 07:28:09 AM »
Model Number?


Hope you find our site helpful.

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 953
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: washer
« Reply #2 on: January 20, 2012, 07:40:24 AM »
UL = unbalance load

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: washer
« Reply #3 on: January 20, 2012, 09:25:34 AM »
Isn't their a bulletin about adding 2 springs and eliminating the counterbalance weight to solve this problem on these machines?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 953
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: washer
« Reply #4 on: January 20, 2012, 09:54:53 AM »

Isn't their a bulletin about adding 2 springs and eliminating the counterbalance weight to solve this problem on these machines?


not that i know of jw

Offline ScottyMo1

  • Technician
  • Member Since: Nov 2011
  • Posts: 169
Re: washer
« Reply #5 on: January 20, 2012, 10:30:28 AM »
With limited information. UL could be several things. Suspension problem, basket balance ring problem, something stuck between basket and tub, or possibly gunk on the tub shaft not allowing basket to float correctly. Just not enough info to work with in original post.

Offline haroldsappliance

  • Technician
  • Member Since: Nov 2011
  • Posts: 616
  • Country: us
    • Appliance repair
Re: washer
« Reply #6 on: January 21, 2012, 03:09:16 AM »
Suspension rods. Part w10189077.  This will solve the beating and banging.

 

Maytag Neptune washer MAH4000AWW

Started by Sue

Replies: 8
Views: 8518
Last post February 09, 2013, 07:41:01 AM
by def
Frigidaire Front Load washer making noise.

Started by curtis

Replies: 3
Views: 7646
Last post July 05, 2007, 09:25:04 PM
by AJ
Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 28375
Last post January 02, 2009, 01:09:38 PM
by AJ
Noisey Washer

Started by jdman

Replies: 15
Views: 7412
Last post July 28, 2007, 09:51:14 AM
by AJ
Estate washer leaking oil

Started by gearhead

Replies: 1
Views: 5795
Last post July 31, 2007, 06:39:31 AM
by AJ
Video: Whirlpool Washer Motor - Bad connection..

Started by AJ

Replies: 3
Views: 3190
Last post July 29, 2013, 06:32:05 PM
by AJ