Standard ice maker issue

[barglancy]

Whirlpool GS6SHEXMQ00

I had an ice tray with a corroded heater element so I replaced it and the control module while I was at it. 
However now I'm getting no water from the tube into the tray.

I ran a small cord down the water tube from the opening and saw it at the back of the fridge so I assume it's not a frozen line.

I checked the connections between the wiring and the module and they look good.

Any suggestions?

Thanks

This is the service manual
http://appliancejunk.com/forums/index.php?action=downloads;sa=view;down=43

[bigbuck]

i would try inlet valve. 

[barglancy]

I was just missing patience.  Went to bed and woke up to ice.  Working like a charm.