Author Topic: Maytag performa burning smell  (Read 2999 times)

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 472
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Maytag performa burning smell
« on: January 11, 2012, 09:30:11 AM »
Model: LAT2500AAE
Just set up a call for tomorrow.  The customer said pump will run fine but when in agitate or spin it will not turn the pulley and smell's burning.  He can turn the pulley by hand and found nothing between the tub.
Any thought's?  Just  a bad belt?
Thanks

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag performa burning smell
« Reply #1 on: January 11, 2012, 10:11:11 AM »
Check the pump.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 472
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: Maytag performa burning smell
« Reply #2 on: January 11, 2012, 10:31:11 AM »
Do you think the pump need's more tension JW?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag performa burning smell
« Reply #3 on: January 11, 2012, 11:46:47 AM »
The pump gets stiff, hard to turn. Their is no adjustment. This washer has 2 belts.
« Last Edit: January 11, 2012, 11:49:33 AM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 472
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: Maytag performa burning smell
« Reply #4 on: January 11, 2012, 11:55:55 AM »
It's not like the old dependable series where the adjustment is with the pump?  Little zoom oil loosen the pump up?

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Maytag performa burning smell
« Reply #5 on: January 11, 2012, 04:48:57 PM »
Take new belts and a pump with you.
Remove the pump belt and run the washer in wash and spin mode to make sure there is not a transmission/spin bearing problem.
If it works without the pump belt on,replace the pump and both belts.
Take a Kid fishing.

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 472
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: Maytag performa burning smell
« Reply #6 on: January 11, 2012, 04:58:45 PM »

Quick and easy...been over thinking these things...thanks guys:)
Sent from my ADR6400L using Tapatalk

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 472
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: Maytag performa burning smell
« Reply #7 on: January 12, 2012, 12:03:29 PM »
Pump good, good on agitate, will not spin.  Spin bearing good...can turn by hand but very tight.  Can't budge tub nut so soaking it in rust buster for night then try again and break apart if need be.  I'm thinking tub bearing...ya think I'm on the right track?

Sent from my ADR6400L using Tapatalk

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Maytag performa burning smell
« Reply #8 on: January 12, 2012, 12:44:53 PM »
Sounds like the right direction. Remember the nut is a right hand thread and a set screw.
Take a Kid fishing.

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 949
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: Maytag performa burning smell
« Reply #9 on: January 12, 2012, 01:07:52 PM »
AND REMEMBER, WATCH THOSE FINGERS!!!!   :rofl: :rofl:

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9229
  • Country: us
    • ApplianceJunk.com - Appliance Repair Help
Re: Maytag performa burning smell
« Reply #10 on: January 12, 2012, 01:11:36 PM »
Quote
Can't budge tub nut so soaking it in rust buster for night then try again and break apart if need be.

If it's that bad I would have just cut the nut off. Chances are you will need to install a new Mounting Stem Kit anyway if you pull it apart and it includes a new nut.





Mounting Stem Repair Kit, part number: AP4390013





Tub Bearing Kit, part number: AP4372971




Replacement parts for MAYTAG LAT2500AAE WASHER-TOP LOADING


Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Maytag performa burning smell
« Reply #11 on: January 12, 2012, 02:38:16 PM »
Here is a nice video from Shawn:

May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 472
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: Maytag performa burning smell
« Reply #12 on: January 12, 2012, 05:47:31 PM »
Good to know I'm on the right track.  Part's on order and going to remember to put the Dremmel in the truck O0
That is a great video Shawn.
Yes, I will watch my fingers ;D
Thanks for the help folks!

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 472
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: Maytag performa burning smell
« Reply #13 on: January 18, 2012, 12:09:11 PM »
Yup, tub bearing was a little rusty ::)   atleast I didn't have to break the sleeve off it's not going anywhere.  May have found where the water came from too.
Thanks, for your help folks. O0

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 472
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: Maytag performa burning smell
« Reply #14 on: January 23, 2012, 02:49:05 PM »
I must have done something wrong.  Just got a call back. 
It's making a squeling noise in transition at agitate and into spin; so I think when I checked the spin bearing I didn't put the cam for the pulley on right and I have brake problem's.
After putting the tub bearing in and new seal/stem it ran great but when I lifted the top in spin it took forever to stop (should have known).  This is a track record for me and really need to correct it.  I have worked on these darn things and have messed up the spacing for the cam before.  I have read the manual again and again...sometime's I get it right but most time's I don't. 1/4"- 3/8" after the brake ingages...just isn't connecting for me.  Anyone have a better way of explaining to me...apparantly my brain is not clicking on this and more than a little embarassed :embarassed: 
I will be going back tomorrow morning to make it right but could use a little help. :P

 

Maytag Neptune MAH4000AWW burning smell during spin cycle.

Started by ksujason

Replies: 15
Views: 16324
Last post September 14, 2008, 11:46:31 PM
by Repair-man
Maytag wont spin, agitate, or drain - also smell something burning

Started by DeaconDad

Replies: 1
Views: 4655
Last post August 09, 2009, 05:39:51 AM
by Repair-man
Maytag Washer no spin burning smell

Started by rego

Replies: 11
Views: 3157
Last post January 25, 2012, 10:59:13 PM
by Blaiser
Maytag Direct-Drive. No spin cycle, burning electric smell, motor is beyond hot.

Started by marcuslamont

Replies: 10
Views: 2180
Last post September 09, 2012, 06:45:01 PM
by marcuslamont
Maytag Neptune MAH4000AWW Won't Drain Water / Smell

Started by mightymac

Replies: 22
Views: 22263
Last post February 15, 2013, 04:35:03 PM
by def
burning smell and squealing noise after coupler replacement

Started by re-leigh

Replies: 8
Views: 3872
Last post November 14, 2007, 07:32:15 PM
by Pegi