365-Day Hassle Free Return Policy!  ·  AppliancePartsPros.com
Washer Parts  ·  Dryer Parts  ·  Refrigerator Parts  ·  Dishwasher Parts  ·  Range & Oven Parts  ·  All Appliance Parts 

Author Topic: cannot turn inner tub after tranny, bearing, and triple seal replacement  (Read 1022 times)

Offline jphilardis

  • VIP Member
  • Member Since: Jan 2012
  • Posts: 1
SAV4655AWW MAYTAG
THE TUB SEAL WAS LEAKING. THE WATER HAD RUSTED THE SHAFT ON THE TRANNY SO I REPLACED IT AS WELL.

AFTER THE REPLACEMENT YOU CANNOT SPIN THE INNER TUB BY HAND AND THE MOTOR APPEARS TO BE RUNNING BACKWARDS?  I KNOW I MISSED SOMETHING BUT I DO NOT KNOW WHAT.

Offline tgoods

  • Technician
    Moderator
  • Member Since: Jul 2010
  • Posts: 1586
  • Country: us
    • Buy me a beer through paypal
Re: cannot turn inner tub after tranny, bearing, and triple seal replacement
« Reply #1 on: January 17, 2012, 02:02:48 PM »
The motor spins one direction for agitation, the other direction for spin.  In the spin direction the pulley rides up a ramp and releases the brake.  In the parts breakdown there are two flat washers above the pulley.  Did those get reinstalled?  What happens when you spin the pulley by hand?

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 955
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: cannot turn inner tub after tranny, bearing, and triple seal replacement
« Reply #2 on: January 17, 2012, 02:57:20 PM »
was milk stool bearing ok???

 

Maytag dependable care stem seal/bearing replacement

Started by michael o

Replies: 3
Views: 4904
Last post December 28, 2007, 12:08:21 AM
by AJ
bocsh bearing & seal replacement

Started by bigbuck

Replies: 1
Views: 887
Last post January 26, 2012, 07:39:45 PM
by rego
Maytag Frontloader bearing replacement

Started by mattD110td5x

Replies: 2
Views: 5072
Last post October 11, 2007, 04:41:26 PM
by mattD110td5x
Frigidiare Kenmore Front Load Washer Inner Tub & Tub Bearing Replacement.

Started by AJ

Replies: 5
Views: 8160
Last post March 03, 2008, 03:56:05 AM
by BrntToast
Changing the Performa or Atlantis Tub Bearing and Seal

Started by Repair-man

Replies: 0
Views: 1909
Last post October 24, 2008, 06:37:17 PM
by Repair-man
Maytag Atlantis washer bearing and seal question

Started by grdnhappy

Replies: 1
Views: 4478
Last post November 10, 2008, 01:00:32 PM
by JWWebster