Get Answers to your Appliance Repair Questions

Author Topic: Maytag french door fridge  (Read 2321 times)

Offline RAH52

  • Technician
  • Member Since: Aug 2008
  • Posts: 935
  • Country: ca
Maytag french door fridge
« on: January 11, 2012, 06:29:46 AM »
Model MBF2256HEW .Evaporator fan runs all the time  24/7 .Temps fine ,ran diagnostics ...thermistors passed ,air door works .Customer says it does not freeze in fresh food ,which I find odd because on arrival the compressor was off but the evap fan was on and air door was open .Never run across this symptom before ...I'm thinking bad control board. It can't decipher the input resistance that one of the thermistors is giving it .Any ideas or thoughts ?

Offline tgoods

  • Technician
  • Member Since: Jul 2010
  • Posts: 1797
  • Country: us
    • Buy me a beer through paypal
Re: Maytag french door fridge
« Reply #1 on: January 11, 2012, 09:52:09 AM »
When you have it in diagnostics does the fan turn on and off?  If it doesn't, I would say you have a bad control board.  If it does, then the customer is probably imagining the problem.  It's perfectly normal for the fan and damper to be working when the compressor is off.  I replace about three jazz boards a year so I keep one on the truck.  In almost all cases it's replaced for a defrost problem.


French Door Fridge not making ice.

Started by Jack Hodge

Replies: 6
Views: 7091
Last post November 26, 2008, 09:18:32 AM
by JWWebster

Started by beanie54

Replies: 4
Views: 11739
Last post October 09, 2009, 10:49:06 PM
by JWWebster
maytag fridge door handle

Started by rodey

Replies: 0
Views: 2395
Last post January 29, 2010, 07:35:48 AM
by rodey

Started by matts1123

Replies: 16
Views: 15949
Last post July 11, 2015, 08:29:49 AM
by wrnch2
Samsung French Door Fridge is dead

Started by resed

Replies: 1
Views: 3482
Last post January 19, 2012, 10:52:52 PM
by niobrara
Where is the ADC board located on a Maytag french door refrigerator?

Started by kenebob

Replies: 8
Views: 5434
Last post August 29, 2012, 03:29:12 AM
by haroldsappliance