Author Topic: Kenmore (Whirlpool) no spin  (Read 474 times)

Offline rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 465
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Kenmore (Whirlpool) no spin
« on: January 08, 2012, 09:03:59 AM »
Model: 11022882100
Customer Complaint: Washer would not spin
Arrived at house and customer had tried to fix it...took out spin assembly bolts and all transmision screws displacing the entire spin assembly in the process.  Luckily did not crack open tranny.
Replaced all tranny screws carefully from underneath. Dissassembled agitator etc. reinstalled tranny and spin assembly.  Reassembled agitator etc. 
Found broken motor coupling (initially thought it was) AP3963893 replaced.  Held breath while running through cycles.  Ran great.  Lucky he didn't dislodge anything inside the tranny :D

 

Kenmore washer by whirlpool, slow spin

Started by deemessingup

Replies: 2
Views: 3800
Last post November 12, 2007, 02:47:14 PM
by deemessingup
Kenmore/Whirlpool spin and agitator noisey

Started by bigcropcircle

Replies: 2
Views: 1575
Last post April 05, 2009, 10:47:42 PM
by JWWebster
Kenmore (Whirlpool) Washer won't spin on normal cycle - will on permanent press

Started by 1brian

Replies: 22
Views: 4873
Last post June 08, 2012, 03:46:50 PM
by AJ
Repair Guide: Whirlpool Direct Drive Washer - No agitate or spin

Started by AJ

Replies: 13
Views: 23959
Last post January 02, 2009, 01:09:38 PM
by AJ
whirlpool belt drive washer won't spin

Started by mthd60sprty

Replies: 7
Views: 5820
Last post June 06, 2013, 08:42:12 AM
by fairbank56
Whirlpool direct drive agitates but no spin

Started by philhyde

Replies: 19
Views: 5647
Last post October 04, 2007, 12:32:52 PM
by philhyde