Author Topic: Amana Air Command 80 SSE + White-Rogers 50A50-288, No Blower on Auto  (Read 1670 times)

Offline Gthoffman

  • VIP Member
  • Member Since: Jan 2012
  • Posts: 1
In searching this forum, I found a similar (but much older) post that asks this question.  I have the equipment mentioned in the title, but my blower fan does not kick on during Auto cycling.  When the fan setting is On, I get heat, but obviously the blower runs 24/7 and is costing me big.  The controller turns on the igniter, but the blower is never activated.  Is my problem as simple as replacing the controller, or am I missing a bad sensor somewhere?  Thoughts on how to diagnose?  Thanks!

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Amana Air Command 80 SSE + White-Rogers 50A50-288, No Blower on Auto
« Reply #1 on: January 08, 2012, 07:44:44 AM »
Check the FLS on the heater.
FLS= fan limit switch.
Take a Kid fishing.

 

Amana 80 SSE Air Command Gas Furnace

Started by JWWebster

Replies: 17
Views: 12390
Last post April 05, 2009, 07:32:44 AM
by Icehouse
Trane furnace with white-rodgers 50A50-571 control NO FAN

Started by hahawil

Replies: 7
Views: 5568
Last post November 26, 2010, 04:00:34 PM
by Icehouse
AC Blower Wiring Questions

Started by billnc

Replies: 6
Views: 12471
Last post June 18, 2008, 11:43:13 PM
by JWWebster
blower motor conversion

Started by hvacapprenticein

Replies: 5
Views: 3650
Last post July 20, 2008, 02:46:48 PM
by JWWebster
Blower motor is... blown

Started by Alcaeus

Replies: 7
Views: 3524
Last post November 01, 2008, 11:13:39 PM
by Alcaeus
Lennox G26 Combustion Air Blower Part Number?

Started by AJ

Replies: 11
Views: 12942
Last post March 09, 2010, 01:18:59 PM
by whodatis67