Maytag MVWC7ESWW0 Agitates while filling and Service Manual Request

[dohbird]

My Maytag MVWC7ESWW0 has started agitating while filling and leaving the clothes wet after spin.

From what I have read, my load sensor/temp switch is bad. I checked the hose from the tub to the switch and it is clear. Does anyone have the service manual for this machine or its Whirlpool counterpart? I'd like to learn a little about how it works while I'm waiting for the backordered switch.
Thanks...

[JWWebster]

http://appliancejunk.com/forums/index.php?topic=8366.msg39801#msg39801

[dohbird]

Thanks for the quick reply and link.

There seems to be an error in the description for the download. Although the description includes the MVWC7ESWW0 model, my washer is very different than the washers in the manual. My washer is direct drive, has an agitator and different controls.

[jumptrout51]

Your water level switch is bad or the plastic tube going to it is pinched not allowing air to activate the switch.
The wet clothes after spin could be due to lint or other debris in the drain pump not allowing all the water to extract.

[dohbird]

Switch tube is OK. Pump is clear and pumps great. While I was in there, I saw that the black fill hose was rubbing on a plastic clamp and had almost rubbed a hole in the hose. Glad I checked it! So, it is probably the water level switch... correct?

Any thoughts on a service manual for this machine?

[JWWebster]

Yep if a pinhole gets in there she won't stop filling
I have a manual and more on direct drive here:

http://sites.google.com/site/sublimeappliancerepair/washer-will-not-spin