At a loss on this one guys. Basically, the whole thing is running as it should except the evap fan will shut on and off and when it does spin I noticed that it will sputter a little bit. Being a kenmore that is made by Amana the frist thing I looked towards was the defrost thermostat, but, it is fine. The next thing I checked out was the defrost timer and it seems totally fine (however I did run into a little bit of confusion when testing the motor, if someone could clarify the setting on the multi-meter I need to use to test the motor in the defrost timer I would appreciate it) then I went for the start relay and it works fine. Oh, and I checked the fan as well and it seems okay. Could it be the cold control?