365-Day Hassle Free Return Policy!  ·  AppliancePartsPros.com
Washer PartsDryer PartsRefrigerator PartsDishwasher PartsRange & Oven PartsAll Appliance Parts

Author Topic: Maytag dishwasher mdb8600aws - shuts down  (Read 1083 times)

Offline Buz G

  • VIP Member
  • Member Since: Dec 2011
  • Posts: 3
Maytag dishwasher mdb8600aws - shuts down
« on: December 18, 2011, 05:47:45 PM »
Ugh! Any suggestions?  My dishwasher will start a cycle, run until the end of the rinse fill, then completely shut down.  No lights at all.  I can press the cancel button and the machine will drain.  If I push the wash button the wash cycle will start all over.   I replaced the control board and the same thing happened.

Any suggestions?  Could it be the control panel? 

Thanks to all

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9969
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Maytag dishwasher mdb8600aws - shuts down
« Reply #1 on: December 18, 2011, 05:57:50 PM »
Please stick with the original topic you start for this problem instead of starting a new one.


It will be easier to follow along that way.


Here is the original topic you started about your dishwasher. Please post any more questions you have about it there.
http://appliancejunk.com/forums/index.php?topic=8979.0




 

Maytag dishwasher mdb8600aws

Started by Buz G

Replies: 4
Views: 1871
Last post December 16, 2011, 06:52:45 PM
by theoldstoveguy
Maytag MDBTT60AWW dishwasher.

Started by Bob

Replies: 3
Views: 9031
Last post September 07, 2007, 07:47:07 AM
by AJ
Maytag dishwasher Control panel replacement

Started by Pastyann

Replies: 1
Views: 8436
Last post September 20, 2007, 12:28:07 PM
by AJ
Maytag dishwasher shaft

Started by tucsondave

Replies: 4
Views: 4697
Last post January 04, 2008, 11:46:29 PM
by AJ
Maytag dishwasher

Started by kdeanes

Replies: 2
Views: 4354
Last post January 24, 2008, 02:02:25 PM
by RegUS_PatOff
Intermittent Problem with Maytag Dishwasher

Started by Firenut

Replies: 2
Views: 6908
Last post March 29, 2008, 12:43:53 PM
by JWWebster