Author Topic: What does F9 on Maytag MGR5780BDB range mean?  (Read 2858 times)

Offline johnt

  • VIP Member
  • Member Since: Dec 2011
  • Posts: 2
What does F9 on Maytag MGR5780BDB range mean?
« on: December 18, 2011, 09:01:43 AM »
My Maytag MGR5780BDB range stopped working and just says F9 on it.
What does that mean?

johnt

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: What does F9 on Maytag MGR5780BDB range mean?
« Reply #1 on: December 18, 2011, 09:20:46 AM »
The guys at app say:
If you were able to manually unlock the door and now have the F9 fail code.  You can try unplugging the power cord or turn off the breaker for a few minutes and power it up again.  Program a self clean cycle and cancel the selection after a few minutes.  The control board constantly looks for a proper circuit on the latch switch and will usually run the motor until it finds the proper circuit.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9393
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: What does F9 on Maytag MGR5780BDB range mean?
« Reply #2 on: December 18, 2011, 09:31:50 AM »
Maytag Range Fault Codes
http://appliancejunk.com/forums/index.php?topic=8927.0


F9
- Door latch
- Check door latch components

You will probably need to replace the door latch lock.
For your model it's part # AP4097777
Hope you find our site helpful.

Offline johnt

  • VIP Member
  • Member Since: Dec 2011
  • Posts: 2
Re: What does F9 on Maytag MGR5780BDB range mean?
« Reply #3 on: December 18, 2011, 05:23:15 PM »
New door latch ordered.

 

Maytag Range - Does not heat

Started by AJ

Replies: 4
Views: 8756
Last post February 23, 2008, 04:58:52 PM
by AJ
Maytag Range no Oven Operation

Started by TechnicianBrian

Replies: 0
Views: 3059
Last post March 29, 2008, 05:33:22 PM
by TechnicianBrian
16010161 Maytag Gas and Electric Range Service Repair Manual

Started by AJ

Replies: 0
Views: 5873
Last post April 03, 2008, 09:54:39 PM
by AJ
Maytag PGR5710BDQ Gas Range, Flashing lock light when bake or broil is pressed

Started by straycatt

Replies: 4
Views: 5600
Last post June 14, 2008, 11:19:00 AM
by straycatt
Maytag Ceramic Cooktop Range digital control panel display is stuck

Started by wghman

Replies: 2
Views: 2559
Last post November 02, 2008, 07:39:21 AM
by wghman
Maytag Smooth Top Range burner issue

Started by mtgappdrh

Replies: 4
Views: 5741
Last post November 22, 2008, 09:21:40 AM
by JWWebster