Maytag dishwasher mdb8600aws

[Buz G]

My Maytag dishwasher model MDB8600AWS shuts down after the rinse cycle.  There are no lights at all on the control panel.  I can cancel the wash and it will drain.  I have replaced the control board and it continues to do the same.

Any suggestions?

[bigbuck]

did you change control panel or control board? may need control panel #  AP4365044

[Buz G]

bigbuck - I replaced the control board #99003162.  Kept a closer eye on when it shuts down.  It fills for the rinse cycle then shuts off.  Never actually starts the rinsing part.  Thanks

[bigbuck]

make sure door switch if working properly,if no lights on display, & you can not start another cycle, then i would replace the control panel # AP4365044
 

[theoldstoveguy]

Check where the electrical comes in at the bottom of the dishwasher. I have seen several cords overheat and quit from a poor connection.