Author Topic: Frigidaire Dryer  (Read 3674 times)

Offline KarenSutton

  • VIP Member
  • Member Since: Apr 2008
  • Posts: 1
Frigidaire Dryer
« on: April 09, 2008, 02:51:10 PM »
I have a Frigidaire Dryer that is over 10 years old.  I have had the drum replaced two times under the warranty.  The first two drums had a coating on them and this kept coming off onto the clothes.  So then a steel drum was put in.  Now the clothes have a red mark that gets on them.  It appears the drum is not centered as you can feel the red velvet strip in certain places and can also feel a white plastic strip that appears to be coming out.  The dryer makes a scraping sound now.  Is this something I can fix myself?

Model FSE747GES1

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9436
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: Frigidaire Dryer
« Reply #1 on: April 10, 2008, 07:23:33 AM »
Hi KarenSutton

I would remove the drum and take a look at the drum bearing in the back of the dryer.
Also check the pads that the front of the drum rides on.

You can enter your model number in the box on the left side "Diagrams, Photos & Schematics" to see some exploded views.

Let us know if you have any other questions.
Hope you find our site helpful.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Frigidaire Dryer
« Reply #2 on: April 10, 2008, 08:49:46 AM »
I fixed one on Tuesday. The glides on the front probably need replacing along with the rear bearing. This is a pretty easy job.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline BrntToast

  • VIP Member
  • Member Since: Nov 2007
  • Posts: 388
  • Mayday Appliance Service
    • frigidaire service blog
Re: Frigidaire Dryer
« Reply #3 on: April 10, 2008, 08:23:45 PM »
you should also change the bottom seal on the dryer front, this is the red strip you speak of, its white when its new, its red now from wear and rust
Mayday Appliance Service
Winnipeg Manitoba Canada


The only stupid question is the one not asked

 

Frigidaire Electric Dryer - Dead

Started by AJ

Replies: 4
Views: 4055
Last post August 17, 2009, 08:45:14 PM
by BrntToast
Frigidaire Dryer - Very Noisy

Started by AJ

Replies: 0
Views: 3236
Last post January 14, 2008, 06:11:08 PM
by AJ
Frigidaire Dryer Timer Knob p/n 1340354 black

Started by nivard

Replies: 6
Views: 8045
Last post March 31, 2008, 01:34:26 PM
by RegUS_PatOff
Frigidaire Dryer Won't Start

Started by TechnicianBrian

Replies: 0
Views: 2775
Last post April 07, 2008, 09:11:45 PM
by TechnicianBrian
Frigidaire Dryer Tearing Clothes

Started by TechnicianBrian

Replies: 0
Views: 3915
Last post June 06, 2008, 01:58:24 PM
by TechnicianBrian
Frigidaire Dryer Not Starting

Started by TechnicianBrian

Replies: 0
Views: 2595
Last post June 14, 2008, 06:52:51 AM
by TechnicianBrian