Author Topic: Kitchen Aid Cooktop Fault Codes Including KECC508MBL and KECC568MBL  (Read 2022 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9390
  • Country: us
    • ApplianceJunk.com - Appliance Repair

 
Electronic Touch Ceramic 30 inch. Cooktop KECC508MBL
Failure Indication
Failure Code
Fault Code Description
Solution

 
F03
One or more keys permanently pressed
1. Clean the glass surface and remove all objects placed on it.
 2. If failure remains, disconnect power for 1 minute.
 3. Reconnect power.
 4. If failure remains, replace the touch control module.

 
F12
Electronic board and touch module communication error
1. Disconnect power for 1 minute.
 2. Reconnect power.
 3. If failure remains, replace board connection cable between touch control module and electronic control.
 4. If failure remains, replace the electronic control.
 5. If failure remains, replace the touch control module.

 
F13
Internal CPU checksum errors
1. Disconnect power for 1 minute.
 2. Reconnect power.
 3. If failure remains, replace the touch control module.

 
F22
Key sensitivity problem
1. Disconnect power for 1 minute.
 2. Reconnect power.
 3. If failure remains, replace the touch control module.

 
F36
Temperature probe hardware error
1. Disconnect power for 1 minute.
 2. Reconnect power.
 3. If failure remains, replace the touch control module.
OVER TEMPERATURE INDICATION
Three indicators alternatively blink in left and right side
This is a temporary standby condition to prevent over temperatures in the cooktop.
 Let the cooktop cool down and the blinking indicators will stop.
Electronic Touch Ceramic 36 inch. Cooktop KECC568MBL
Failure Indication
Failure Code
Fault Code Description
Solution

 
F03
One or more keys permanently pressed
1. Clean the glass surface and remove all objects placed on it.
 2. If failure remains, disconnect power for 1 minute.
 3. Reconnect power.
 4. If failure remains, replace the touch control module.

 
F12
Electronic board and touch module communication error
1. Disconnect power for 1 minute.
 2. Reconnect power.
 3. If failure remains, replace board connection cable between touch control module and electronic control.
 4. If failure remains, replace the electronic control.
 5. If failure remains, replace the touch control module.

 
F13
Internal CPU checksum errors
1. Disconnect power for 1 minute.
 2. Reconnect power.
 3. If failure remains, replace the touch control module.

 
F22
Key sensitivity problem
1. Disconnect power for 1 minute.
 2. Reconnect power.
 3. If failure remains, replace the touch control module.

 
F36
Temperature probe hardware error
1. Disconnect power for 1 minute.
 2. Reconnect power.
 3. If failure remains, replace the touch control module.
OVER TEMPERATURE INDICATION
Three indicators alternatively blink in left and right side
This is a temporary standby condition to prevent over temperatures in the cooktop.
 Let the cooktop cool down and the blinking indicators will stop.
 

Find Parts
Fault Code Index
Hope you find our site helpful.

 

Kitchen Aid Range / Stove / Oven Fault Codes (Including both 4 digit and 2 dig

Started by AJ

Replies: 0
Views: 2424
Last post December 15, 2011, 12:47:18 PM
by AJ
Kitchen Aid Built-In Microwave Oven Fault Codes

Started by AJ

Replies: 0
Views: 2727
Last post December 15, 2011, 12:49:46 PM
by AJ
fault codes

Started by rogerlodger123

Replies: 2
Views: 1778
Last post March 02, 2009, 07:31:24 AM
by rogerlodger123
Frigidaire Range Fault Codes and RTD Chart Service Manual

Started by AJ

Replies: 0
Views: 1447
Last post August 20, 2009, 06:35:16 PM
by AJ
Maytag Range / Stove / Oven Fault Codes

Started by AJ

Replies: 0
Views: 4710
Last post December 15, 2011, 11:35:14 AM
by AJ
Whirlpool Range / Stove / Oven Fault Codes

Started by AJ

Replies: 0
Views: 3642
Last post December 15, 2011, 11:49:09 AM
by AJ