Jenn Air Range / Stove / Oven Fault Codes

[AJ]

 

Failure Code	Fault Code Description	Solution
F0	Function key stuck	Replace touch pad or if touch pad is part of the clock, replace the clock (ERC).
F1	Defective touch pad or clock (ERC)	Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information.
F2	Oven temperature too hot	Replace relay board, if present, or oven temperature sensor (RTD). Check sensor harness.
F3  or  F4	Shorted or open oven temperature sensor (RTD)	Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.
F5	Watchdog and hardware conflict	Replace clock (ERC).
F7	Function key shorted or stuck	Replace touch pad or if touch pad is part of the clock, replace the clock (ERC).
F8	Analog / Digital problem	Replace clock (ERC).
F9	Door latch	Check door latch components.

 
Find Parts
Fault Code Index