Author Topic: Admiral Range / Stove / Oven Fault Codes  (Read 2518 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9329
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Admiral Range / Stove / Oven Fault Codes
« on: December 15, 2011, 12:36:29 PM »

 
Failure Code
Fault Code Description
Solution
F0
Function key stuck
Replace touch pad or if touch pad is part of the clock, replace the clock (ERC).
F1
Defective touch pad or clock (ERC)
Replace touch pad or clock (ERC). Touch pad is a more common problem. Refer to F1 test at the top of this page for more information.
F2
Oven temperature too hot
Replace relay board, if present, or oven temperature sensor (RTD). Check sensor harness.
F3
 or
 F4
Shorted or open oven temperature sensor (RTD)
Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.
F5
Watchdog and hardware conflict
Replace clock (ERC).
F7
Function key shorted or stuck
Replace touch pad or if touch pad is part of the clock, replace the clock (ERC).
F8
Analog / Digital problem
Replace clock (ERC).
F9
Door latch
Check door latch components.

Find Parts
Fault Code Index
Hope you find our site helpful.
Follow us on Google+

donate
$1, $2, $5, $10, $20, $50
 

Maytag Range / Stove / Oven Fault Codes

Started by AJ

Replies: 0
Views: 4387
Last post December 15, 2011, 11:35:14 AM
by AJ
Whirlpool Range / Stove / Oven Fault Codes

Started by AJ

Replies: 0
Views: 3362
Last post December 15, 2011, 11:49:09 AM
by AJ
Frigidaire Range / Stove / Oven Fault Codes

Started by AJ

Replies: 0
Views: 8522
Last post December 15, 2011, 12:30:40 PM
by AJ
GE Range / Stove / Oven Fault Codes

Started by AJ

Replies: 0
Views: 3536
Last post December 15, 2011, 12:32:15 PM
by AJ
Dacor Range / Stove / Oven Fault Codes

Started by AJ

Replies: 0
Views: 2230
Last post December 15, 2011, 12:37:45 PM
by AJ
Gibson Range / Stove / Oven Fault Codes

Started by AJ

Replies: 0
Views: 2218
Last post December 15, 2011, 12:39:32 PM
by AJ