Author Topic: maytag atlantis w/m MAV6200AWW needs help to spin  (Read 1057 times)

Offline rollingthunder6

  • VIP Member
  • Member Since: Dec 2010
  • Posts: 5
maytag atlantis w/m MAV6200AWW needs help to spin
« on: January 03, 2012, 10:21:38 AM »
This problem is about a Maytag Atlantis washing machine, model MAV6200AWW.
It is 10 years old.  Six weeks ago I replaced the lid switch b/c at that time the machine would start up after it had filled with water only if i thumped the lid.  After I replaced the lid switch, that symptom disappeared and it ran the way it is supposed to until a week ago.  The problem i'm having now is that when the machine comes to the spin cycle, it stops and does nothing.  To getting it going i have to PUSH IN horizontally on the lid (thumping it does not work).  Assuming that the lid switch is still good, what else might be wrong with this machine?

thank you.

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 947
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: maytag atlantis w/m MAV6200AWW needs help to spin
« Reply #1 on: January 03, 2012, 10:39:39 AM »
did you change lid plunger #  7 in diagram?
 
 

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 8928
  • Country: us
    • Buy me a beer through paypal
    • ApplianceJunk.com - Appliance Repair Help
Re: maytag atlantis w/m MAV6200AWW needs help to spin
« Reply #2 on: January 03, 2012, 10:43:08 AM »
did you change lid plunger #  7 in diagram?

Here is the diagram bigbuck is talking about.

MAV6200AWW Top Diagram
Hope you find our site helpful.

Offline rollingthunder6

  • VIP Member
  • Member Since: Dec 2010
  • Posts: 5
Re: maytag atlantis w/m MAV6200AWW needs help to spin
« Reply #3 on: January 03, 2012, 12:34:23 PM »
yes, i changed ## 7 (plunger) , 8 (plunger guide tube ) , and 9 (lid cam) as well.  sorry i forgot to mention that in the origianl post

thank you

Offline bigbuck

  • Technician
  • Member Since: Jan 2011
  • Posts: 947
  • Country: us
  • over 30 years repairing appliance
    • Buy me a beer through paypal
Re: maytag atlantis w/m MAV6200AWW needs help to spin
« Reply #4 on: January 03, 2012, 12:45:16 PM »
sounds to me, that there still a issue with lid switch engaging all the way. WHAT DO YOU THINK  AJ.

 

maytag Atlantis washer timer switch doesn't activate spin cycle

Started by helpme805

Replies: 6
Views: 6069
Last post July 30, 2011, 08:35:12 PM
by AJ
Maytag Atlantis top loading washer doesn't spin out water

Started by ramchaza

Replies: 2
Views: 2053
Last post March 22, 2010, 01:24:14 PM
by ramchaza
Maytag Atlantis--Spin, but no agitate.

Started by bmackkc

Replies: 13
Views: 5422
Last post September 18, 2010, 11:27:03 AM
by Washaman
Maytag Atlantis Slipping during Spin

Started by garywlynch

Replies: 1
Views: 1054
Last post November 11, 2010, 12:45:53 PM
by magician59
Maytag Atlantis Leaks water during spin

Started by texasfiremn

Replies: 6
Views: 3182
Last post December 02, 2010, 11:49:12 PM
by Washaman
maytag atlantis washer won't do final spin

Started by boytambay

Replies: 1
Views: 1615
Last post September 10, 2011, 09:52:16 PM
by blondejon