Author Topic: Airtemp Chrysler Furnace  (Read 3752 times)

Offline NeilNde

  • VIP Member
  • Member Since: Oct 2011
  • Posts: 3
Airtemp Chrysler Furnace
« on: October 26, 2011, 04:09:17 PM »
Hey any help would be great!
I have a Chrysler airtemp Hot air furnace that i cannot get to fire off. I light the pilot and torn th gas valve to on. As soon as i turn the power on to the unit it kills the pilot. I have tried to jump past the hi pressure cut off and that didnt work. Now i have no where else to go. there is only thre electronics in it gas control, High pressure cut off switch and a transformer.
HELP!!!!

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Airtemp Chrysler Furnace
« Reply #1 on: October 26, 2011, 04:26:37 PM »
Post some photos of the furnace control, the gas valve and the pilot.
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline NeilNde

  • VIP Member
  • Member Since: Oct 2011
  • Posts: 3
Re: Airtemp Chrysler Furnace
« Reply #2 on: October 26, 2011, 07:31:20 PM »
Furnace pic

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Airtemp Chrysler Furnace
« Reply #3 on: October 27, 2011, 10:54:40 AM »
I would try a new thermocouple first:


May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline NeilNde

  • VIP Member
  • Member Since: Oct 2011
  • Posts: 3
Re: Airtemp Chrysler Furnace
« Reply #4 on: October 27, 2011, 08:23:31 PM »
Already rplaced thermal couple. And the gas control

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8780
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: Airtemp Chrysler Furnace
« Reply #5 on: October 28, 2011, 12:42:50 AM »
Post a better pic of what you calling the gas control
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline jumptrout51

  • Technician
  • Member Since: Nov 2007
  • Posts: 1879
  • Country: us
    • Buy me a beer through paypal
Re: Airtemp Chrysler Furnace
« Reply #6 on: October 30, 2011, 06:20:32 AM »
Use a rubber pencil eraser to clean the port on the gas valve where the thermocouple screws in.
Make certain the pilot flame  engulfs the last 3rd of the pilot sensor shaft towards the tip.
Adjust the pilot flame volume on the gas valve. It must be strong and blue.
Take a Kid fishing.

 

Airtemp furnace

Started by maypo52

Replies: 9
Views: 8601
Last post March 05, 2008, 02:36:32 PM
by JWWebster
whirpool furnace fs643-125cr

Started by ddh

Replies: 2
Views: 2908
Last post July 04, 2008, 09:44:24 AM
by ddh
Rheem Furnace needs a new Thermo Coupler

Started by rezman6

Replies: 3
Views: 6389
Last post October 31, 2008, 08:07:56 AM
by Icehouse
Furnace fan keeps running after normal shutoff by thermostat.

Started by hleebeard@sbcglo

Replies: 1
Views: 6322
Last post January 10, 2009, 09:00:48 PM
by JWWebster
Annual Furnace Tune Up and Maintenance

Started by Icehouse

Replies: 0
Views: 3438
Last post January 24, 2009, 07:28:17 PM
by Icehouse
How does a Warm Air Heating Furnace work?

Started by Icehouse

Replies: 0
Views: 6659
Last post January 24, 2009, 07:31:22 PM
by Icehouse