Author Topic: Kenmore touch pad non responsive - lights off  (Read 1298 times)

Offline djharrislcsw

  • VIP Member
  • Member Since: Dec 2011
  • Posts: 5
Kenmore touch pad non responsive - lights off
« on: December 02, 2011, 06:35:37 PM »
Hi I have a Kenmore 66513749K603 dishwasher which has finally died.  The touch pad is totally non-responsive - no lights nothing happens.  I am assuming that it's the electronic control board.  If so where can I find diagrams on how to install it?
Thanks

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Kenmore touch pad non responsive - lights off
« Reply #1 on: December 02, 2011, 06:43:12 PM »
I would first make sure the dishwasher is getting power. Check the house breaker and then check the dishwasher junction box were the power cord connects to the dishwasher. Sometimes the wire nuts come loose.

Also check the thermal fuse that is located on the control board.



Thermal Fuse Part # W10258275 Thermal Fuse, AP4423189







Offline djharrislcsw

  • VIP Member
  • Member Since: Dec 2011
  • Posts: 5
Re: Kenmore touch pad non responsive - lights off
« Reply #2 on: December 02, 2011, 09:57:00 PM »
Thank you
It is getting power, nuts/bolts are fine, junction box is fine.  I already had a service person in who said it is the board but they were back ordered (plus other problems) so I ordered one myself.  When it comes I would like to be able to install it myself.

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Kenmore touch pad non responsive - lights off
« Reply #3 on: December 02, 2011, 10:02:11 PM »
Disconnect the power, open the door and remove the screws around the door liner. The control board is located behind the panel the buttons are on. Unplug the old board and plug the new one in, not much to it. Let us know if that fixes it.

Offline djharrislcsw

  • VIP Member
  • Member Since: Dec 2011
  • Posts: 5
Re: Kenmore touch pad non responsive - lights off
« Reply #4 on: December 02, 2011, 10:52:39 PM »
Thanks so much that sounds simple enough - I won't know until the board gets here in a couple of days but I will let you know.

Offline djharrislcsw

  • VIP Member
  • Member Since: Dec 2011
  • Posts: 5
Re: Kenmore touch pad non responsive - lights off
« Reply #5 on: December 10, 2011, 03:58:34 PM »
Hi Again:

The control board came, we installed it with ease, closed the dishwasher - it began making low noise as if beginning a cycle and I assumed it was re-calibrating - but the lights never came on and it stopped after about 2 minutes.  Now we have a new board, no lights on the controls and nothing happens when we push any button.  Any thoughts?
Thanks
DJH

Offline niobrara

  • Technician
  • Member Since: Sep 2009
  • Posts: 1139
Re: Kenmore touch pad non responsive - lights off
« Reply #6 on: December 10, 2011, 06:09:53 PM »
Control Panel

Item # 1551936

Offline djharrislcsw

  • VIP Member
  • Member Since: Dec 2011
  • Posts: 5
Re: Kenmore touch pad non responsive - lights off
« Reply #7 on: December 11, 2011, 08:08:21 AM »
Thanks - will do.

 

Kitchen Aid Diswhasher - Power but no lights on touch pad

Started by jrbpit1

Replies: 4
Views: 1485
Last post June 15, 2011, 02:05:46 PM
by AJ
Lights flashing on touch pad

Started by Caddy4343

Replies: 6
Views: 961
Last post December 14, 2012, 07:44:09 PM
by Caddy4343
Kenmore Dishwasher - Doesn't always drain.

Started by yeltu1188

Replies: 1
Views: 3415
Last post September 15, 2007, 10:36:53 AM
by Pegi
Kenmore Elite Dishwasher

Started by sparky823

Replies: 8
Views: 4025
Last post October 11, 2007, 09:16:14 AM
by Pegi
Kenmore Elite Dishwasher Does Not Start

Started by rgletter

Replies: 5
Views: 4108
Last post December 14, 2007, 07:45:52 PM
by rickgburton
Kenmore 665 dishwasher chopper assembly cover

Started by tomnewf

Replies: 2
Views: 6755
Last post January 06, 2008, 10:59:43 AM
by AJ