Get Answers to your Appliance Repair Questions

Author Topic: Kenmore Elite Ice Maker Stopped Working  (Read 2268 times)

Offline sayaaah

  • VIP Member
  • Member Since: Nov 2011
  • Posts: 2
Kenmore Elite Ice Maker Stopped Working
« on: November 17, 2011, 07:54:58 PM »
Kenmore model 10657715703 side-by-side refrig (Whirlpool), about 2 years old. No ice production. Ice tray dry and empty all the time, sometimes warm.  Water in door OK.  Freezer temp a steady +2F. Sensor light blinks when freezer door open, steady on when flapper door is closed, off when freezer light is off. Found another blog that talked about error codes from sensor light? When blinking, continuous cycle of 2 blinks and a short pause.

Any diagnosis help would be appreciated.

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: Kenmore Elite Ice Maker Stopped Working
« Reply #1 on: November 17, 2011, 10:26:23 PM »
Water in door OK

All that tells you is that you have water to the refrigerator.

If the ice maker is not getting water to it the first thing I check is to make sure the line that feeds water directly to the ice maker is not frozen shut.


Whirlpool ice maker stopped working after bucket defrost

Started by stream41

Replies: 23
Views: 17802
Last post December 07, 2012, 12:32:18 PM
by AJ
Kenmore side-by-side ice maker not working

Started by bpelles

Replies: 1
Views: 4067
Last post July 12, 2009, 08:45:32 PM
by JWWebster
Whirlpool Gold 51 lb Ice Maker Stopped Working

Started by ugalisa

Replies: 1
Views: 4660
Last post April 27, 2010, 04:41:44 PM
by jumptrout51
Kenmore Elite Refrigerator light & water dispenser not working

Started by cco

Replies: 3
Views: 11036
Last post June 06, 2010, 07:36:38 PM
by schaffersapplian
Kenmore Elite refrigerator icemaker not working

Started by JudyNH

Replies: 2
Views: 6517
Last post December 18, 2010, 08:06:31 PM
by JWWebster
Ice maker stopped working abruptly

Started by three-one-seven

Replies: 4
Views: 2770
Last post July 10, 2012, 11:00:26 AM
by three-one-seven