Author Topic: Kenmore 400 Washer - Inconsistent Spin - replaced clutch and coupler  (Read 3508 times)

Offline RegUS_PatOff

  • Technician
  • Member Since: Dec 2007
  • Posts: 1410
  • Country: us
Re: Kenmore 400 Washer - Inconsistent Spin - replaced clutch and coupler
« Reply #10 on: November 25, 2011, 01:24:00 PM »
MODEL NUMBER ?
After leaving this Earth, "Do you want the smoking or non-smoking section?"

Offline jbtools

  • Technician
  • Member Since: Mar 2008
  • Posts: 5
Re: Kenmore 400 Washer - Inconsistent Spin - replaced clutch and coupler
« Reply #11 on: November 25, 2011, 07:49:09 PM »
Probable intermitent timer issue.does not pause after drain to engage spin,continues all the way to the end of cycle without ever spinning. however if you open lid and close it it will begin to spin. good luck joe

 

Whirlpool top load washer won't spin - replaced coupler and clutch

Started by kodiakmook

Replies: 4
Views: 2283
Last post January 25, 2012, 01:58:55 AM
by Washaman
replaced the motor coupler, Kenmore 80 washer, cant get the motor back on

Started by Freda

Replies: 19
Views: 8353
Last post May 03, 2009, 07:35:47 PM
by JWWebster
Kenmore Washer 417.43142300 - no spin/agitate. replaced speed contrl brd

Started by dtcaruso

Replies: 5
Views: 7039
Last post November 01, 2009, 11:18:07 PM
by dennisc
Kenmore washer 110.28912790 - replaced coupler and now worse...help?

Started by Bowen

Replies: 20
Views: 3135
Last post December 23, 2011, 08:12:56 AM
by AJ
KENMORE 500 washer no spin.not clutch

Started by stocpro47

Replies: 5
Views: 834
Last post July 27, 2013, 08:40:13 PM
by stocpro47
Kenmore washer spins intermittently - clutch and coupler are good

Started by robtheduck

Replies: 6
Views: 1671
Last post July 16, 2014, 10:06:55 PM
by robtheduck