Author Topic: How I fixed a Whirlpool LEQ9030PQ1 dryer that was not heating.  (Read 1272 times)

Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9431
  • Country: us
    • ApplianceJunk.com - Appliance Repair
This Whirlpool LEQ9030PQ1 dryer would run, but not heat.


After checking the dryer to make sure it was getting the correct voltage I unplugged it and pulled it out from the wall so I could remove the back of the dryer.


After removing the back of the dryer I removed the wires from the heating element and checked the heating element with my ohm meter.


The heating element checked bad with my meter so I replaced the heating element with a new one, part # 279838

 

Whirlpool Dryer Not Heating

Started by TechnicianBrian

Replies: 0
Views: 4427
Last post March 29, 2008, 05:33:22 PM
by TechnicianBrian
WHIRLPOOL DRYER NOT HEATING

Started by lowhook

Replies: 10
Views: 6237
Last post May 26, 2009, 02:37:08 PM
by AJ
Whirlpool Dryer Not Heating

Started by TechnicianBrian

Replies: 0
Views: 5596
Last post May 07, 2008, 06:16:37 PM
by TechnicianBrian
Whirlpool Laundry Center Dryer not Heating

Started by TechnicianBrian

Replies: 0
Views: 4388
Last post May 23, 2008, 07:22:00 AM
by TechnicianBrian
Whirlpool Dryer Not Heating

Started by TechnicianBrian

Replies: 2
Views: 6847
Last post August 07, 2008, 06:50:06 PM
by AJ
Whirlpool Dryer Not Heating

Started by TechnicianBrian

Replies: 0
Views: 2332
Last post August 07, 2008, 08:37:17 PM
by TechnicianBrian