Lets see if anyone can help!!
OK, I am working on a Frigidare Stackable unit - Model# FEX831FS4
and here is my problem: It won't pump the water out or spin afterwards. Here is what I have done: I ran a jumper wire from the pump to the 110 outlet and then the pump starts and takes the water out, then I undo the jumper and plug in the right line and put the timer on spin and it will spin, so in my thinking the pump is good, and the lid switch is good as it now spins, soooo I am thinking its the timer, would this be correct or do you have another reason or could it still be the pump or lid switch? Also I started the machine again and it will fill and agitate and when it comes to rise or spin the timer continues to move but will not do anything and then when I put the jumper power line to the pump it will pump and then advance to spin!! I am REALLY CONFUSED. Everyone is telling me that its a bad spot in the timer, but I need to be sure, not just changing parts. PLEASE help if you can hopefully this is not too confusing and you are able to understand all of this. Looking forward to a good response from the pros. Thanks in advance for the help