GOT IT FIXED! Once I got the front control panel off (thanks) I found I had L1 and L2 going in and out of control board with broil on just as it should be. I was getting the 120v previously coming from the broil button output just not the other side that also feeds the bake element. After seeing and checking the wires I found that the L2 wire is tied in together with the bake and another wire. Evidently I just had a bad connection on the harness plug or at the point where the common wires tie in together. Anyway it's working now. I can tell from the burn on my finger after checking the broil element. Thanks for the info on taking the panel off.