Airtemp Chrysler Furnace

[NeilNde]

Hey any help would be great!
I have a Chrysler airtemp Hot air furnace that i cannot get to fire off. I light the pilot and torn th gas valve to on. As soon as i turn the power on to the unit it kills the pilot. I have tried to jump past the hi pressure cut off and that didnt work. Now i have no where else to go. there is only thre electronics in it gas control, High pressure cut off switch and a transformer.
HELP!!!!

[JWWebster]

Post some photos of the furnace control, the gas valve and the pilot.

[NeilNde]

Furnace pic

[JWWebster]

I would try a new thermocouple first:

[NeilNde]

Already rplaced thermal couple. And the gas control

[JWWebster]

Post a better pic of what you calling the gas control

[jumptrout51]

Use a rubber pencil eraser to clean the port on the gas valve where the thermocouple screws in.
Make certain the pilot flame  engulfs the last 3rd of the pilot sensor shaft towards the tip.
Adjust the pilot flame volume on the gas valve. It must be strong and blue.