Key Panel Test
The key panel is connected to the control by a
ribbon connector. The control will sound a tone
when any of the pads are depressed except for the
To help isolate a problem to either the control or
key panel, depress each pad on the key panel
followed by the Clear / Off pad and observe the
• Bake, Broil, Clean, Timer, Clock, Stop Time,
and Cook Time Modes - Audible tone plus
display showing mode of operation selected.
• Clear / Off - Audible tone and display shows
time of day.
• +/- Pads - No audible tone. Can only be used
after another function pad has been selected.
If some of the pads work and some don’t, the
problem is probably with the key panel. To verify
that the key panel is the problem, check the
connector for proper insertion of the ribbon cable
and perform the Ohmmeter Test. If the ohmmeter
reads infinity W when depressing the pad, or
shows some resistance without depressing the
pad, the key panel is bad.