Author Topic: GE profile stove manual or tech sheet?  (Read 4147 times)

Online rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 474
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: GE profile stove manual or tech sheet?
« Reply #10 on: October 16, 2011, 03:25:52 PM »
I adjusted the hood's to get a good flame when I did the change over.  JW was saying I needed to open or back off the orifice's for the oven bake/broil and I do not see that in this model.  If I'm wrong I would love to hear it.  I can check the individual components and if they check ok I will have replace the control.  I just hate throughing parts at something without checking...drives me nut's when people do!  There is no tech sheet and can't find a manual to check this sucker out.  I will probably end up ruling out everything else and then go to the control.  Why can't GE work with us little guys and let loose of some info...

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: GE profile stove manual or tech sheet?
« Reply #11 on: October 16, 2011, 04:21:05 PM »
This is a adjustable broiler orifice found on your model GE range. The brass hood on the end can be screwed in and out to adjust it instead of changing a orifice.

http://www.repairclinic.com/PartDetail/Gas-Burner-or-Control-Component/WB02T10189/1084490?modelNumber=JGSP48BH1BB

And this must be the one for the bake, also has the adjustable brass hood on the end.

http://www.repairclinic.com/PartDetail/Gas-Supply-Tube/WB28T10094/1086565?modelNumber=JGSP48BH1BB

Did you make any adjustments to them?

Online rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 474
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: GE profile stove manual or tech sheet?
« Reply #12 on: October 17, 2011, 07:24:17 AM »
Aha! I did not!  Missed it completely! :embarassed:   What do you think one full turn?
Thanks!

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: GE profile stove manual or tech sheet?
« Reply #13 on: October 17, 2011, 07:39:29 AM »
You will want to open them up so turn them CCW.
I would say half to a full turn.

Online rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 474
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: GE profile stove manual or tech sheet?
« Reply #14 on: October 17, 2011, 07:56:44 AM »
Will do thanks!

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: GE profile stove manual or tech sheet?
« Reply #15 on: October 17, 2011, 10:44:34 AM »
Let us know how it works out for you.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE profile stove manual or tech sheet?
« Reply #16 on: October 17, 2011, 11:23:59 AM »
Let the oven come on then adjust the burner flame to where it goes not more than half way up the flame spreader.
If you get too much flame the bottom of the food will burn. If you have too little flame it will take an hour to blind bake a pie shell. Trust me  :rofl:
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Online rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 474
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: GE profile stove manual or tech sheet?
« Reply #17 on: October 17, 2011, 11:27:28 AM »
Thanks all it's up and running nicely!  Can't believe I didn't adjust those the first time...oh well, atleast I woln't forget again. :D

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: GE profile stove manual or tech sheet?
« Reply #18 on: October 17, 2011, 11:29:17 AM »
I replaced my mom's safety valve years ago. I asked her how it was doing. She gently told me well it works but it takes a lot longer to cook than it did.  :2funny:
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Online rego

  • Technician
  • Member Since: Apr 2011
  • Posts: 474
  • Country: us
  • Quality Service You Can Afford
    • Buy me a beer through paypal
    • Reges Service and Repair
Re: GE profile stove manual or tech sheet?
« Reply #19 on: October 17, 2011, 12:02:33 PM »
 :P  Now I've been there too.

 

Anyone? tech sheet / manual Jenn Air Dual Fuel Downdraft Slide in SVD48600W

Started by Wedgeman55

Replies: 5
Views: 1698
Last post February 10, 2013, 09:00:12 AM
by AJ
Whirlpool Electric stove RF362LXTSO diagnostic tech sheet

Started by Tsuf

Replies: 3
Views: 1199
Last post April 13, 2013, 03:20:22 PM
by plochhead.
Need wiring diagram and tech manual

Started by jumptrout51

Replies: 1
Views: 1823
Last post November 26, 2008, 06:31:41 PM
by jumptrout51
need the service manual for a GE STOVE

Started by viking351

Replies: 1
Views: 1592
Last post February 06, 2009, 02:23:51 PM
by jumptrout51
Looking for Miele oven Tech manual

Started by krazytech

Replies: 0
Views: 1327
Last post November 18, 2009, 04:42:29 AM
by krazytech
GE Profile Microwave Service Manual anyone?

Started by rego

Replies: 7
Views: 5582
Last post July 27, 2011, 04:14:15 PM
by tgoods