Author Topic: spin problem  (Read 10283 times)

Offline DH13

  • VIP Member
  • Member Since: Nov 2011
  • Posts: 27
Re: spin problem
« Reply #60 on: December 04, 2011, 06:21:57 PM »
If that's the case, I'm done.  This machine is turning into a hole in the basement I throw money into.

Offline DH13

  • VIP Member
  • Member Since: Nov 2011
  • Posts: 27
Re: spin problem
« Reply #61 on: December 05, 2011, 11:34:38 AM »
Whirlpooltech have any last words for my kenmore before it's put to pasture?

Offline whirlpooltech

  • Technician
  • Member Since: Nov 2007
  • Posts: 1367
  • Country: us
  • 20 years of experience
Re: spin problem
« Reply #62 on: December 05, 2011, 11:44:52 AM »
You either have a bad motor or something binding.

I agree with JW, don't know what else to tell ya...

Offline DH13

  • VIP Member
  • Member Since: Nov 2011
  • Posts: 27
Re: spin problem
« Reply #63 on: December 05, 2011, 12:53:31 PM »
Could the brake be sticking or causing problems?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: spin problem
« Reply #64 on: December 05, 2011, 02:29:53 PM »
Very possible. Has it been sitting up?
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline DH13

  • VIP Member
  • Member Since: Nov 2011
  • Posts: 27
Re: spin problem
« Reply #65 on: December 05, 2011, 02:37:48 PM »
I don't know what sitting up means.  You mean has the washer been sitting upright?  Yes.  It has also been laying on its side for days on end.  How do I check the brakes?

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: spin problem
« Reply #66 on: December 05, 2011, 03:26:57 PM »
Slow spin phenom can cause the motor to short cycle also. Remove the agitator and then remove the basket. Lay her over and remove the tranny. Then twist the brake cam actuator and release the brake and yank out the spin tube assembly as seen in this video:

« Last Edit: December 05, 2011, 03:29:45 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

Offline DH13

  • VIP Member
  • Member Since: Nov 2011
  • Posts: 27
Re: spin problem
« Reply #67 on: December 13, 2011, 07:32:52 PM »
I found a used motor on ebay for $40 and another capacitor for $5.  So after $130 total and countless hours, all installed and washer is running smoothely (fingers crossed).

Thanks again for all the help.

DH


Offline AJ

  • Technician
    Administrator
  • Member Since: Jun 2007
  • Posts: 9587
  • Country: us
    • ApplianceJunk.com - Appliance Repair
Re: spin problem
« Reply #68 on: December 13, 2011, 07:43:16 PM »
Glad to hear you got it working and thanks for the donation to our site.  O0
Hope you find our website helpful.

Offline JWWebster

  • Technician
  • Member Since: Jan 2008
  • Posts: 8781
  • Country: us
  • SublimeMasterJW
    • Buy me a beer through paypal
    • JW's Sublime Appliance Advice
Re: spin problem
« Reply #69 on: December 15, 2011, 05:34:38 PM »
I been pretty busy today. I cleaned up a whirlpool dryer and put a coupler on one of these washers. I have one more to fix and it is doing the same thing. Clicking. I put the motor of the other washer I put a coupling on on that washer and all it did was click so I know it is something to do with the brake. It got dark on me so I gotta wait to fix this one tomorrow. I am gonna take some pix. Purty day today. 77 degrees and sunny with a slight breeze from the south. Hope tomorrow is just as nice :)
« Last Edit: December 15, 2011, 05:36:30 PM by JWWebster »
May the hinges of our friendship
        never grow rusty.

About the icons: The beer is tip link, if a tech saves ya some money buy em a 6 pack. The small green square=personal message. The green dot is a link to my web page on appliance repair and other general BS I love to post. The letter sends me email.
I love fan letters! LOL

 

Maytag LAT9356AAE Spin problem

Started by Camarocam

Replies: 2
Views: 4470
Last post February 20, 2008, 10:10:40 AM
by Repair-man
Maytag Washer Spin & Drain Problem

Started by lulubovary

Replies: 1
Views: 3219
Last post March 11, 2008, 04:43:09 PM
by Repair-man
Maytag Performa spin problem

Started by chrismorrow02

Replies: 3
Views: 6800
Last post December 15, 2008, 07:21:33 PM
by Repair-man
XO4100Transmission or clutch problem causing wet clothes after final spin cycle?

Started by bsponge

Replies: 6
Views: 3788
Last post January 25, 2009, 11:06:36 AM
by Repair-man
Maytag Neptune Spin Problem/Contoller board not burnt

Started by sdocsmith

Replies: 3
Views: 2275
Last post January 08, 2009, 02:52:28 PM
by whirlpooltech
Whirlpool Washer Occasional Spin Problem

Started by restless

Replies: 3
Views: 1929
Last post February 03, 2009, 05:25:09 PM
by JWWebster