Author Topic: Lg Tromm Dryer model DLE5977W Grinding Sound  (Read 2766 times)

Offline sonowav

  • VIP Member
  • Member Since: Oct 2011
  • Posts: 1
Lg Tromm Dryer model DLE5977W Grinding Sound
« on: October 02, 2011, 02:18:53 PM »
Hi all, (my first post) our LG Tromm Dryer DLE5977w has an incredibly loud grinding sound when the drum is spinning. Any thoughts would be greatly appreciated!

Offline wildimaginations

  • Technician
  • Member Since: Jul 2011
  • Posts: 621
  • Country: us
Re: Lg Tromm Dryer model DLE5977W Grinding Sound
« Reply #1 on: October 02, 2011, 04:13:32 PM »
Sounds like something got in through the lint filter screen on to the blower wheel.  Possibly a sock.  You will need to disassemble the dryer to get to the blower fan and remove the debris.



Appliance Service Technician
Authorized servicer on LG appliances.
About 45 mins east of San Francisco

Offline Major

  • VIP Member
  • Member Since: May 2010
  • Posts: 60
  • Country: ca
Re: Lg Tromm Dryer model DLE5977W Grinding Sound
« Reply #2 on: October 06, 2011, 12:46:28 AM »
Hi:  While you have the dryer front panel off have a look or feel the front drum rollers.
Lift drum off roller a bit and feel for roughness or loosness between roller and shaft
I have come across these being bad a few times before. If bad you will need to replace the roller and shaft.

 

LG Tromm DLE5977W Dryer Service Manual

Started by jdman

Replies: 4
Views: 10266
Last post January 01, 2012, 11:51:34 AM
by AJ
Kenmore Electric Dryer - Model F60909644

Started by txgal

Replies: 1
Views: 4831
Last post August 07, 2007, 08:21:33 AM
by AJ
maytag dryer model # md 3500 (no heat)

Started by #13

Replies: 5
Views: 7136
Last post December 05, 2007, 07:15:02 AM
by apptech
Kenmore Dryer Model 110.76660100 Heater wires burned

Started by gwilli

Replies: 2
Views: 6635
Last post January 16, 2008, 01:31:15 PM
by JWWebster
LG TROMM gas dryer

Started by godamnjon

Replies: 3
Views: 4881
Last post October 31, 2008, 10:34:44 PM
by AJ
Late Model Hotpoint dryer

Started by JWWebster

Replies: 1
Views: 1323
Last post September 11, 2011, 08:19:18 AM
by AJ